Author Topic: 2017, 128", FLHXSE, Stock heads, Stock T/B with SE manifold, Fulsac system 2.0  (Read 1437 times)

0 Members and 1 Guest are viewing this topic.

Offline HD/WRENCH

  • Full Member
  • Posts: 6087
  • Country: 00
Has GRC crank as it was very stuck , did NOT remove counter balancers Andrews Cam Stock heads Zero deck set up . This Bike RIPS


17 128 fulsac 2.0 cores stock heads tb tts by GMR Performance, on Flickr
« Last Edit: August 05, 2019, 06:07:17 AM by rigidthumper »

Offline dfwhockey17

  • Member
  • Posts: 4
  • Country: us
Hell of a job Man!!!

Offline Ohio HD

  • OH CRAP!
  • Administrator
  • Full Member
  • *****
  • Posts: 21669
  • Country: us
  • Mark, 06/02: There's no cryin' in modifyin'
As always, looks great Steve.
For the best deal on bike parts, call Calif Phil
     www.harleypartscheap.com

Offline mike jesse

  • Site Supporter
  • Full Member
  • *****
  • Posts: 1086
  • Country: us
First build I've personally seen using the Fueling cams.

Looks like they work well in this combo.

 :up:

Offline joes124

  • Full Member
  • Posts: 85
  • Country: us
what a curve...hold on!

Offline yobtaf103

  • Site Supporter
  • Full Member
  • *****
  • Posts: 320
  • Country: gb
Steady on there Steve,not the cam you quoted on GMR FB page?

Offline rigidthumper

  • Administrator
  • Full Member
  • *****
  • Posts: 5153
  • Country: us
  • Mark, 06/02: There's no cryin' in modifyin'
What's the CCP on this one? ;)

Offline No Cents

  • Full Member
  • Posts: 8454
  • Country: us
  • there is no cure for what I got !
   :up:
nice job Steve
08 FLHX my grocery getter, 124ci, wfolarry 110" heads, Burns pipe, 158/152 sae

Offline HD/WRENCH

  • Full Member
  • Posts: 6087
  • Country: 00
I linked wrong sheet . That is the andrews cam I did two of these cam change was only change both 128 same EX system . I got in touch with admin maybe they can swap the sheets . The Fueling cam made slightly less pretty much same curves though . That is Andrews cam not the fueling .

Offline 1workinman

  • Site Supporter
  • Full Member
  • *****
  • Posts: 1337
  • Country: us
Should be a fun ride

Offline RTMike

  • Full Member
  • Posts: 65
  • Country: ca
Steve letís have some details on the motor

Offline HD/WRENCH

  • Full Member
  • Posts: 6087
  • Country: 00
Not much to tell stock heads 128 andrews 550 cam fulsac ex system  parts are listed . just a nice combo of parts .

Offline Grof

  • Full Member
  • Posts: 112
  • Country: us
Not much to tell stock heads 128 andrews 550 cam fulsac ex system  parts are listed . just a nice combo of parts .
Steve did you have opportunity to swap exhaust for thunderheader or DnD or any other big name just to see results ... tnx

Offline scotman623

  • Member
  • Posts: 13
  • Country: us
Really IMPRESSIVE curve!! Guess I better be more aware of Andrew Cams... NICE...