fuel injection to carborator swap

[branas123]

i have a 07 fire bolt 1200 engine i am putting in my sportster and i am having to carborate it,  how do i wire it, the wiring harness for the sportster is different, like the cam position sensor on the buell engine has 3 wires and the sportster has 5. is there a kit to buy, i bought buell manual but it doesnt have what each individual wires are. how do i wire it?

[panhead_dan]

I would look into something like a Dyna ignition and just delete the cam position sensor as well as all the others and the ECM.

I know this isn't much help but I am very interestd in your project. Please post up progress.

[Midas]

I would look into something like a Dyna ignition and just delete the cam position sensor as well as all the others and the ECM.

I know this isn't much help but I am very interestd in your project. Please post up progress.

I converted an XR1200 to carb using a German (AMM - P3 HIGH-PERFORMANCE. MOTORCYCLE IGNITION) ignition unit, the XR uses the crank sensor and does not have a cam sensor, so I would advise you contact this guy to see if his ignition unit will work on the Buell

http://www.amm.haan.de/