April 26, 2024, 10:25:29 PM

News:

For advertising inquiries or help with registration or other issues, you may contact us by email at help@harleytechtalk.com

Adjustable Pushrods

Started by Sunny Jim, September 19, 2017, 01:57:22 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Sunny Jim

September 19, 2017, 01:57:22 AM
I am looking at pushrods for my M8 cam conversion.
I already have a set of smiths Brothers adjustables on the bench out of the 120r.
I see SE do an M8 kit 17900058.
Twin cam is 18404-08.
Can some one explain the difference. Do I need new pushrod covers for the M8?
Cheers!

Durwood

September 19, 2017, 03:26:38 AM #1
Quote from: Sunny Jim on September 19, 2017, 01:57:22 AM
I am looking at pushrods for my M8 cam conversion.
I already have a set of smiths Brothers adjustables on the bench out of the 120r.
I see SE do an M8 kit 17900058.
Twin cam is 18404-08.
Can some one explain the difference. Do I need new pushrod covers for the M8?
Cheers!
Twin cam push rods work fine. You need S&S push rod cover keepers #930-0129 to go along with Evo tubes if you already have some, or you can buy the cover kit #106-1340, which comes with the tubes and keepers.

Difference is the keepers/clips are 2.200" in length for the Milwaukee Eight.
User actions
Print
Go Up Pages1