News:

Main Menu

2003 Sportster tip over switch

Started by 88b, September 23, 2017, 10:12:15 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

88b

Got home today to find a friends Sporty on my drive, he phoned to say it just cut out . I'm leaning towards the tip over switch, I'm told it can be shorted out or bypassed . There are three wires , two small and a thick black in the middle. Anyone know if you just join the two smaller wires ?

hdbikedoc

tip over switch built into ign module in nosecone  don't know what your trying to jump but don't think its a bank angle switch
Keep your feet on the pegs and your right hand cranked

88b

Problem is the ign module in the nose cone . This is bolted to the side of the battery tray, has a plug with three wires . Take it off and shake it, has a ball bearing in it .

FSG

If I had to I disconnect the BAS and jumper A to C


aswracing


88b

Quote from: aswracing on October 23, 2017, 07:24:44 AM
Ground the green/gray wire.

Thanks for that , I'll try and remember in case I ever need it. Finally got the module ( none in Europe ) last Saturday , only took an hour to change it .