TTS100 cam?

[Eccool]

I am posting this for a friend.  Bike is a 2017 FLHTK.  Has Fuel Moto head pipes, mufflers and air filter and a Powervision.  He's thinking about adding a TTS100 cam and wanted any feedback on that cam.  He rides two up about half the time and uses it as a commuter plus the occasional trip.  Thanks!

[sprinkman]

I have done some reading on the tts100 cams. My understanding they are a great torq cam for heavy bikes and 2 up riding. I am also thinking about installing them over the winter. They have a lot of info on the trike forum about this cams been out for awhile.

[goblue90]

I'm trying to decide between the TTS100 and the Cycle-rama 460.  They both seem to add a good amount of torque at the lower rpm range.  Decisions, decisions...

[SLAATY]

If you go here:
https://www.facebook.com/Sheffer-Performance-HD-LLC-1544666332477222/?fref=ts

Scroll down a bit and you'll find where Durwood has posted tunes on the CR450 and CR460 cam. I'm ordering a 460 from him shortly, and hopefully a tune in the next few months. When I have 💰.

[goblue90]

Thanks Slaaty.  I ordered the CR460 cam this morning.  Can't wait to get it installed.

[harleytuner]

The TTS 100 hits hard from 2K to about 45-4800.  It's strong. If you rode higher up in the RPM's take a look at the 150. It gives up a, little over the 100 between 2-3250 but shines from about 3-5500. Both good cams for the M8

[Herko]

...I ordered the CR460 cam this morning...

You'll be glad you did.

[sfmichael]

...I ordered the CR460 cam this morning...

You'll be glad you did.