Engine, Transmission, Primary seals and spacers

[-deuced-]

2001 Deuce. Thought maybe I'd run over a strawberry milkshake   
Pulled the inner primary and found the shifter shaft seal leaking. I'd like to replace every seal and spacer before I put it back together. Having some trouble with part numbers. I'm using an '01 parts manual, swimming with the microfiches and searching htt. Looking for some help with a few questions.

Sprocket Shaft Spacer
'01 PM says 24039-01. Yeah, right. That's gone the way of the dodo.
24039-01A. Seems to have followed.
24039-03. How is it different from the other two?

Kinda partial to oem seals but open to suggestions of other brands. Also don't mind brief history lessons. Did case bore and shifter shaft change with the 6 speeds? Will shifter shaft seal 11000101 retro fit?

I'm into preventative maintenance. Also doing some budget cosmetic stuff and a couple of little upgrades. I'm sure there'll be more questions, stay tuned. Appreciate any tips or pointers.

[FSG]

24039-01 has been revised to 24039-01A, no problem there, your '01 Deuce as a Timken Tapered Bottom End on the left side, lucky bstrd

The 24039-03 is the spacer  for the Roller Bearing Bottom End on the left side which came into being with the '03 models such as my '03 Fatty

The difference in the spacers is the length,  I have listed them before, I'll post again.

The spacer will cost you A$30 to A$40 from HD, they are also available through the aftar market.

Take a look at my thread below and think about getting a local machine shop to turn up one specific for you, cost prolly less than $100.

http://harleytechtalk.com/htt/index.php?topic=73290.0

http://harleytechtalk.com/htt/index.php?topic=91739.0

[-deuced-]

Hey thanks. Seen that thread about your spacer 

[Trouble]

Replaced the leaky shifter shaft seal on my '04 RK last year, using a double-lipped seal purchased from Applied Industrial Technologies. Part #CR-4260. Harley didn't have but a single-lipped seal so I went for the extra protection and so far, so good.

[mrmike]

I pulled my inner primary last winter ('03 RK) to replace the shift lever I also did all seals and the drive belt.

I used all Locktite products in regards to thread sealers mating surface sealers and such instead of the HD books recommendation of silicone. Bike is clean as a whistle not a drop anywhere.

For parts I went to California Phil, that was the easiest part of the job, I used Cometic seals and their double lipped seal for the shifter shaft. Like I said no issues.


Mike

[1FSTRK]

Harley has a kit that includes everything except the outer primary cover gasket.
HD-25700225 for 99-06 Twin cam 5 speeds

[14Frisco]

24039-01 has been revised to 24039-01A, no problem there

Unless it has been obsoleted - it appears that maybe in 2014 it fell off the shelves?

[FSG]

24039-01 has been revised to 24039-01A, no problem there

Unless it has been obsoleted - it appears that maybe in 2014 it fell off the shelves?

yes, my bad, was available in Feb 2014 and gone by July,

nevermind the aftermarket has it covered,  .983" in length, measure the wear mark on the old one and perhaps just reverse it 

[-deuced-]

............ Part #CR-4260.............

SKF-4260 dual lip with spring
11000101 dual lip with spring
Diameters and thickness the same?

24039-01 has been revised to 24039-01A............

http://harleytechtalk.com/htt/index.php?topic=73290.0

The revision is a shoulder, although not as substantial as FSG's. There's several on the bay.

.........HD-25700225........

Seems to be for '07 up. Primary mountings are different. Also, not everything but  on the black gasket.


Appreciate the replies, thanks.

[Trouble]

     
   
Locate Service Centers | Site Map
 

         
 

Login
 




   

* Established Account Required
Quick Links

--Select Link--My DashboardMy Account*Change Account*Technical Calculators *Technical Info *What's New Glossary *Request CatalogMaintenancePROTips & Troubleshooting Login




























Search

508,928 Products


Search By:
KeywordMfr Part NumberItem Number (SKU)Catalog Order NumberCatalog PageCompetitor Part Number
Search Criteria:

Method:
Exact MatchBegins WithContains
Select Manufacturer
---Select All--- 3M A&A Manufacturing Co. Inc. Acco Chain Accuform Signs Acme Distributor Sales ACR Group, Inc. Advanced Cable Ties Aearo Co. Aegis Aeroquip Aervoe Aetna Bearing Co. Air & Hydraulic Engineering Air Tak Compressed Air Syst Airmaster Fan Co Akro-Mils Alemite Alinabal Allegro Allen Tools Alta Industries Altra Industrial Motion American Air Filters American Couplings Co. American Preparedness American Roller Bearing American Seal & Eng Co Amflo Products AMI Bearings Inc. Ampco Tools Amprobe® Anchor Fluid Power Anchor Products Anchor Wiping Cloth Co. Anderson Products Ansell Ansul Fire Protection AOSafety Apex Industrial Fastener Tools Apex Tool Group Apex Tools Applied Industrial Technologies Armstrong Tool ARO Corp. Ashcroft Associated Equipment Atlas Welding Atra-Flex Aurora Bearing Co. Automatic Switch Co. C/O Aviation Direct B'laster Chemicals B-Loc Bagby Gage Bailey Hydraulics Baldor Baldor Motors & Drives Band-It Idex, Inc. Barden Corp. Bayco/Nightstick Behringer Corp. Belden, Inc. Bernard Welding Bernzomatic Bestt Liebco® Big Beam Binks Bishop Wisecarver Bison Gear Bitumastic Blackhawk Blitz USA Bluffton Motor Works Bondhus Corp. Bondo Bosch Boss Manufacturing Co. Boston Gear Bouton Bradford Brady Safety Brand Hydraulics Breeze Clamps Brennan Industries Bright Star Bronze Bars Bronze Bushings Brown & Sharpe Browning BSM Pumps Bucket Boss / Maasdam Bullard Bunting Bearings, LLC C.H. Hanson Campbell Canfield Connector Carborundum Carhartt CCL Security Products Cerro Copper Tubing CGW Abrasives Champion Channellock Char-Lynn Chemfree Corp. Chicago Hardware Chicago Pneumatic Chicago Rawhide CLC Custom Leather Crafts Cleco Clift Industries Climax Metal Coffing Hoists Coilhose Pneumatics Coleman Cable Inc. Columbus McKinnon Comeaux Caps Continental Conveyor ContiTech Control Devices, LLC Cooper Bearing Co Cooper Tool Cooper Tool Cooper Wiring Devices Cortina Safety Products Covalence Adhesives Coxreels Inc. Coxwells Inc. CR Speedisleeve Craft Bearing Co. Inc. Craftsman Tool CRC Industries, Inc. Crescent Crews Inc. Crosby Group Cross Co. Cross Manufacturing Inc. Crown Daman Products Daniel Woodhead Dart Controls Inc. David Brown Radicon DBI/Sala Deb-Stoko Delta Tool Storage Deltrol Fluid Products Des-Case Corp. Deublin Co. Devan Johnson Devcon DeWalt Diamond Dichtomatik North America Dixon Dixon Valve & Coupling Dodge Donaldson Dotco Douglas Manufacturing Co., Inc. Dow Corning Corp. Dremel Dremel Tool Drill Doctor Duff Norton Dupont Dupont Duracell Durham Dutton Lainson Dyna-Flux Dynabrade Air Tools DynaQuip Controls E.A.R. Eagle Manufacturing Eaton Eaton Corp EFC International Eklind Tool eLine Empire Level Energizer Enerpac Enidine Inc. Erem Ergodyne Ericson Electrical Plugs Estwing Hammers Eureka Chemical Co. Everflex Exide Facom Tools FAG Falk Corp. Federal Mogul Fenner Drives Fill-Rite/Tuthill Firestone First Aid Only Fiske Brothers Fki Logistex Inc Flame Engineering Flange Wizard Flexco Flow Ezy Filters, Inc. Fluke Corp. FMC Material Handling Corp. FMC Technologies Frommelt Safety Furon Gage Glass Gardner Bender Gardner Denver Garlock Garlock Bearings LLC Gasboy Pumps Gasoila Chemicals Gatorade Gearench Wrenches GearWrench Tool General Bearing General Tool Genetic Genstar Tech. Gerson Respirators Gits Manufacturing Co. GLP Group, Inc. Gojo Goldblatt Drywall GoldSpec® Goss Welding Graco Greenlee Tools Greer Hydraulics Guardair Tools Guardian Equipment Gunk Gunnebo-Johnson Corp. H.K. Porter Harper Hand Trucks Harwal Inc. Heim Bearings Heli-Coil Henkel Hi-Lift Jacks Hi-Lite Solutions Hi-Tech Duravent Inc. Hilman Rollers Hitachi Hoerbiger Origa Corp. Holo Krome Honeywell Safety Products Howard Leight Hub City Hyde Tools Hydraulic Power Unit Acc. Hydro-Craft Ideal Div. Epicor Ind. Inc. Ideal Industries Ideal Reel Igloo Imperial Tool Ina USA Corp. Ingersoll-Rand Co. Intertape Polymer Group Ironclad Irwin Industrial Tools ISS ITW Dykem ITW Dymon Jackson Professional Tool Jackson Safety Jacobs Chuck Manufacturing Janitorial Jergens, Inc. Jessup Safety Jet Equipment & Tools Jorgensen Tape Measures JPO Absorbents Justrite Kaydon Bearing KB Electronics Keeper Corp. Kennedy Tool Storage Kidde Safety Kilian Bearing Kimberly-Clark Klein Tools Kolor Kut Komelon USA Kop Flex, Inc. Koyo Corp. Krylon Kuriyama of America, Inc. KYB Corp. of America L.S. Starrett Co. La-Man Corp. Lake Monitors Lang Tools Lapco Leatherman Tools Leeson Legacy Manufacturing Legris Lenco Clamps Lenox Tool Lenze AC Tech Lewis Manufacturing Liftex Lincoln Industrial Link-Belt Linzer Lion Hydraulics Liquid Wrench Littelfuse, Inc. Little Joe Loctite Louisville Ladder Lovejoy LPS Lab Inc. Lubriplate Lufkin Lug-All M.D. Knowlton Co. Mag-Lite Magna Magnaflux Magnaloy Coupling Co. Magnolia Brush Maintenance Supplies & Solutions Makita USA Mapa Professional Gloves Markal La-Co Industries Inc. Marshalltown Trowel Martin Sprocket & Gear Marvel Mystery Oil Maska Master Power Master PT Master/Desa Heaters Master/Honda MasterLock Mathews Conveyor Maxi-Lift Mayhew Tools MB Manufacturing McGill MCR Safety Mechanix Wear Memphis Glove Co. Merit Abrasives Metabo Power Tools Meterman® MHS Caster & Manufacturing Miller Miller Safety Equipment Milwaukee Electric Tool Corp. Milwaukee Hand Trucks Milwaukee Sprayer Mitutoyo Tools Moldex Metric Inc. Monarch Instrument Morse Industrial Corp. Motor Guard Motorola Inc. MRC Bearing Service MSA Nashua Tape National Marker National Twist Drill Neese Industries Nelson Williams Linings Inc. Never-Seez Nexen Group, Inc. Nice Bearing Nicholson NIGHTSTICK Nook Industries Norcross Safety Products Norgren North Safety Northpointe Industries Norton Co. NSK Corp. NTN Bearing Corp. NTN Bearing Corp. (BCA) Occunomix Oetiker Inc. Off / Raid Oil-Dri Corp. of America Oil-Rite Corp. OilSafe® Orange Peel Oring ORS Nasco Osborn International Osborn Pro OTC Tool Pacific Bearing Parker Hannifin Corp. Parker/Schrader Bellows Peerless Chain Pelican Products Peltor Perfecting Coupling Pferd Advanced Phoenix International Physician's Care Pic Design Corp. (Prec. Ind. Comp.) PIP Plastomer Products Plews Engineering System Plumb Plymouth Pop Rivet Port-A-Cool LLC Porter Cable Corp. Posi-Lock PowerFlare Precision Brand Precision Pulley & Idler Presco Prime Wire & Cable ProShield Protecta Protective Apparel Proto® Tools Pumper Parts Purdy® Pyroil Radiator Specialty Randall Bearings Inc. Rawhyde Frontier Ray-O-Vac RBC Bearings Rectorseal Red Devil Reelcraft Industries Inc. Regal Beloit Renold Jeffrey Chain Resinet Barrier & Fence Rexnord Corp. Rexnord Corporation Ridgid Tool Co. River City Rod Guard/Safe Rollway Bearing Co. Rotor Clip Rubbermaid Rubberset Ruland Mfg. Co., Inc. Rust-oleum Saf-T-Cart Saftronics Samson Sandpiper Sanford Schaeffler Schatz Bearing Corp. Scotwood Industries SDRC by Renold Sealmaster Shaffer Shop-Vac Showa Best Gloves Shur-Line Tools Shurtape Technologies Inc. Simplex Simplex (Templeton Kenly) Sioux Sipco Sisal Rope SK Hand Tool Corp. SKF Motion Technologies SKF USA Skil Smalley Steel Ring Co. Smith Bearing Snoop Leak SNR Bearings Southern Glove SPC Service Solutions (OTC) SPC/Brady Spectroline Speed Control, Inc. Sperian Sphag Sorb Spherco Spilltech Environmental Spiralcool Spray Nine Sprayon Sprayon Products Group Sqwincher Stanco Mfg. Standard Abrasives, Inc. Standard LN & LW Inc Standard LN & LW Inc. Standard Locknut Standard Locknut (LW) Stanley Bostich Stanley Tools Stearns Division Stephens Adamson Strapbinder (Acme) Streamlight Inc. Sumner Supreme Lighting Products Swanson Tools Swift First Aid Symmco Inc. Syracuse Stamping System Plast T.B. Woods Tarp Straps TCM Telco USA Inc. Tempil Tesa Tape Thermal Transfer Products Ltd. Thermoid Thomson Industries Thomson Saginaw Tillman Timken Co. Torrington Total USA TPI Corp. Trail-Rite Boat Trailer Tri-Flow Trico Mfg. Corp. Triton Products Turtle Wax Tyvek U.S. Electric Motors U.S. Gauge U.S. Seal Manufacturing Ultman UltraTech International Union Tools Inc. United American Sales US Tape US Tsubaki Inc. Uvex Vac Cubes Van Gorp Vickers Victor (Turbo Torch) W.M. Berg Inc. Warner Electric Warp Brothers Warren Electric Corp. Watson Watts/Compaire Pneumatics WD-40 Co. Weatherhead Weg Electric Corp. Weiler Brush Co. Weiss Instruments Wej-It Fastening Systems Weksler Weld-Aid Weller Wells Lamont Western Enterprises White Lightning Wilson Safety Products Wilton Tool Winsmith Wiss WMH Tool Group Woods Wire Worthington Wrap-On Wright Tool Wyeth-Scott Wypo Xcelite Yamaha Yelloc Zero-Max Zircon Industries Zoll  (Hold CTRL key for multiple mfr's) 


Search
   
Past Search






Search Categories

508,928 Items

--Select Category--BearingsCouplings & Universal JointsElectric MotorsFiltrationGeneral Industrial ProductsHose & Fluid ConnectorsHydraulic ProductsIndustrial ChemicalsJanitorial ProductsLinear MotionLubrication Products & EquipmentMaterial HandlingPaints & CoatingsPneumatic ProductsPower TransmissionProcess EquipmentSafety ProductsSeals, O-Rings & SleevesSpeed Reducers & GearingTools
 



Active Shopping Cart


Cart Total: $0.00
Line Items: 0


View Cart
   




Quick Order Pad






Locate Service Center









Enter Ship-To ZIP Code:


Search




Web Technical Support


For questions contact the Help Desk:
P: 1-800-655-6552
E: techsupport@applied.com

Tips & Troubleshooting 



 
Product Detail  Welcome Guest 




   
Click image for larger view

Printer Friendly Version of Page




Item Details
Part#: Part#: 4260
Item#: 100746479

Manufacturer: Chicago Rawhide
Weight: 0.064 lbs. 
Product Name: Radial Shaft Seal
Description: Radial Shaft Seal; Radial Shaft Seal; 11.13 mm Shaft Diameter; 22.23 mm Housing Bore Diameter; 6.35 mm Width

Shopping
Price: $9.14 
Inventory: In stock 


Order Qty:     
Add
 

You may also need: Wear Sleeves
Find Similar Part  i 





Specifications
Inch/Metric Inch
Metric Mounted Unit Series 
Shaft Dia. [Min]  Shaft Dia. [Max] 
Shaft Dia. 0.438 in
11.13 mm Housing Bore Dia. 22.23 mm
Width [Min]  Width [Max] 
Width 6.35 mm
1/4 in Construction CRWA6 
Lip Material Nitrile Lip Style Internal
Lip Type Dual Lip w/One Spring Case Construction Rubber Covered Steel Case
Seal Type  Bore Dia. [Min] 
Bore Dia. [Max]  Bore Dia. 
Corner Radius [Min]  Dynamic Load Rating 
Limiting Speed  Material 
O.D. [Min]  O.D. [Max] 
O.D.  Seal Design Assembled Design
Seal Width  SS 
Static Load Rating [Max]  Spring Material Carbon Steel Garter
Pressure [Min]  Pressure [Max] 
Pressure 10 psi Temperature Range [Min] -65 °F
Temperature Range [Max] 225 °F Misalignment & Runout (In. @ Feet Per Minute) 0.010@3600
0.015@1000
Surface Speed [Min]  Surface Speed [Max] 
Surface Speed 3600 ft/min Maximum Shaft RPM [Max] 4500 rpm
Seal Application Dirt Exclusion Cover/Compensation Ring/Plate Required No
Size Code     



Product Information
Description
Dual lip design without inner cases. 

























 



Store Locator | Terms of Access | Terms of Sale | Privacy Policy | Supplier Terms | Return Policy
Copyright © 1999-2017 Applied Industrial Technologies. All Rights Reserved.
This site is optimized for 5.0 browsers and above. Get Acrobat® Reader® 

[1FSTRK]

.........HD-25700225........

Seems to be for '07 up. Primary mountings are different. Also, not everything but  on the black gasket.


Appreciate the replies, thanks.

PAB979.pdf  shows

25700225 for all 5 speed twin cams
25700226 for all 6 speed cush-drive twin cams

Neither kit includes the large outer primary cover gasket.