17 RGU 107 loping

[HV]

Yes seen a few older ones fail but they dont effect any other systems when they do as with the Can Bus ones ....

[2016CTRoadGlide]

mo betta................all good on idle.

I have the same issue.  Could you share the name of the dealer?  My dealer has tried to reproduce the issue and will not do anything until they can.  I am tired of having the bike in the shop (oil pump for sumping; rocker arms replaced because they were rubbing on heads; fluid transfer; head bolt on rear cylinder sheared off and now this).  Only 16,000 miles.  Honda willing to give me great trade for a new 2018 Gold Wing (but it is not a Harley!)

[hd06]

 Ride it till it blows then you will get it fixed with a new motor with all the upgrades. 

[billbeemer]

tell them it won't start in gear, and it's intermittent.  tell them it died at a light, and almost caused an accident, which it did for me.  we were returning from the falconheavy liftoff in titusville in bumper to bumper traffic, the damn thing died, i had to get neutral to restart.  if they give u any "Potty mouth", call harley and tell them u don't feel safe.  Tampa Harley took care of mine.  it's such a small switch,  don't know why your dealer doesn't just go ahead and replace it!!!!  the times i have called Harley consumer line, they have been very responsive................

[2016CTRoadGlide]

Thanks for the input!  I will call Tampa Harley to get part number  and also try again.   

[HV]

Its a small switch but unfortunately they have to replace the complete Left Hand Switch Module that has all the switches on it....still....no Biggie....I cant see why they are giving you grief ....unless they are unable to figure out how to test it...

[2016CTRoadGlide]

Its a small switch but unfortunately they have to replace the complete Left Hand Switch Module that has all the switches on it....still....no Biggie....I cant see why they are giving you grief ....unless they are unable to figure out how to test it...

Dealer agreed to update the calibration per notice dated 8/9/2017 to address a low rpm "sag" this morning.  They then have to remap the bike with my SE Tuner so I hope to get the bike back on the road tomorrow before another storm hits the NE on Sunday.  Hope this fixes the problem!   

[billbeemer]

I didn't have a tuner, bike was stock ceppin Rinehart slip-ons.  let us know results.  clutch safety switch did the trick for me.

[2016CTRoadGlide]

Its a small switch but unfortunately they have to replace the complete Left Hand Switch Module that has all the switches on it....still....no Biggie....I cant see why they are giving you grief ....unless they are unable to figure out how to test it...

They would not replace the switch.  They went ahead with the suggested Harley flash but bike ran poorly until they re-flashed with the SE Tuner to Stage 1 Dyno calibration.  Took the bike out for a 250 mile trip and had no repeat of stalling.  Bike ran great.  I guess the gremlins decided to leave!   

[HV]

The main thing is that its fixed.....If it ever stops starting in gear with the clutch in...then you need a switch

[2016CTRoadGlide]

The main thing is that its fixed.....If it ever stops starting in gear with the clutch in...then you need a switch

Thanks.   

[billbeemer]

now I'm confused.  i have no tuner and the switch fixed my reaching and loping.  I heard stage one tuner upped idle to 950.  this is like voodoo.  maybe two different problems?

[happyman]

The main thing is that its fixed.....If it ever stops starting in gear with the clutch in...then you need a switch

doe the position of the kick stand  make any difference?

[HV]

There is no kick stand switch

[happyman]

There is no kick stand switch

thanks, seen  elsewhere someone made the statement and I never  noticed one on  my current bike so had to ask.

[Jacob1955]

I did the Stage 1 download on my 2017 M8 and now it idle's all the time at around 975-1000 rpm after warm up,it used to fall down to around 750 rpm when hot but that's fine with me makes it feel better on the off idle start.

[billbeemer]

was at my dealer's today, and thanked my tech for replacing clutch safety switch. I asked what it had to do with the idle loping.  he says..."no connection, the update from harley fixed the loping problem".   soooooo......case closed!

[billbeemer]

mystery solved........at about 10k miles, my ECM was replaced trying to solve an intermittent cooling fan problem.  Looking back, I noticed the slow loping, reaching idle after that.  didn't put it together, since my mind was on solving fan issue.  apparently the new ECM didn't have current updates, and performing the update last week completely changed the characteristics of riding the RGU. 

[billbeemer]

just returned from a few days at Daytona.  my clutch switch is acting up intermittently again.  affects the idle, it lopes and reaches...........dealer tech was full of it.  this will be the third problem with that same switch. 

[HV]

Yes the fact that the Tech has no clue why it effects it dosnt change the Fact that it does     Tell them the switch acts up intermittently and almost caused you to have an accident.....and you want it replaced 

[billbeemer]

thanks HV, i told dealer i was afraid for safety and it was acting up in traffic at Daytona, which it was.  the bike is in shop, the story is Harley has updated clutch lever and they will replace everything on left side.  stay tuned............parts on order.  I don't want to ride until I'm reasonably certain it's fixed, it stalls and lopes in slow traffic only which is scary.

[HV]

 

[billbeemer]

bike is home, just pulled in.  dealer replaced complete left side unit.  apparently their is a bulletin and upgrade on the parts. Tampa Harley treat me like a king...btw,  anyone know how I get subscribed to Harley tech bulletins?

[HV]

Yes the Left hand unit ( Right too for that matter ) are all in one ...you have to replace the whole thing ...they  have updated the part a few times.... all tech bulletins are in this section of HTT  http://harleytechtalk.com/htt/index.php?board=31.0

[billbeemer]

link didn't work.