News:


Main Menu

So who makes camshafts?

Started by N-gin, April 04, 2018, 04:45:32 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

N-gin

How is the grinder of the Harley cams? There is very little info on CycleRama.
I hear that SS is getting away from it  :scratch: is this true.

So to my understanding Andrews is the only one,  :scratch:

thanks for any help, I'm not looking to make a set. This is just for information purposes.
I have also hear that Justin, (I think that's his name), he left SS.
I'm not here cause of a path before me, Im here cause of the burnout left behind

HD/Wrench

Andrews Grinds a fair amount of cams for many shops us being one of those. As who does HD  Which cam ? stock or SE  Two companies  Comp was doing some of the Se not sure if that is still the case .

Justin has been gone from S&S  for a while now. Has his own shop ,

S&S to my knowledge is still grinding their own cams and will grind customs as well .

wfolarry

Andrews grinds their cams & a lot of others
S&S does their own. Maybe a custom.
Comp was locked in with the MOCO so they didn't offer their own line of cams for the TC. Now they do. They also grind cams for others as well.
Zippers grinds their Redshift cams. Maybe a custom IDK.
There's a couple others out there that I'm forgetting.

Ohio HD

Lockwood Engineering grinds them, as far as I know all custom stuff, and their brand. I thought they owned the Sifton name for awhile, but not really sure.


http://www.crazyhorsespeedshop.com/


SixShooter14

According to my source, Comp still grinds for HD.
'97 Road King, Rinehart True Dual, HSR42, 10:1, EVL3010, 2000i
'21 Road Glide Special stock 114

Jim Bronson

#5
Quote from: SixShooter14 on April 04, 2018, 02:25:28 PM
According to my source, Comp still grinds for HD.
:agree: The spec sheet for my 259Es shows Comp Cams as the manufacturer.
Going down that long, lonesome highway. Gonna live life my way.

EL in NH

Regards

Unbalanced

Andrews, Lunati, Comp, Zippers, S&S,

N-gin

I'm not here cause of a path before me, Im here cause of the burnout left behind

TorQuePimp

Crane has/had over 70 lobe profiles for harley,some published some not

Really good stuff

WhipLash96

Quote from: Ohio HD on April 04, 2018, 01:03:54 PM
Lockwood Engineering grinds them, as far as I know all custom stuff, and their brand. I thought they owned the Sifton name for awhile, but not really sure.


http://www.crazyhorsespeedshop.com/

This is where I went for a set of cams for my 124....
Thanks,<br />Whip

trex


1FSTRK

"Never hang on to a mistake just because you spent time or money making it."