Pistons etc

[Sunny Jim]

Long story short! Down under we love our bikes.
The OZ dollar is dropping in value and new import tax laws are on the horizon.
It's time to act on the M8,
We have access to a great head guru with a cnc program for the M8 heads.
I am looking at different piston/ cylinder combos.
Any thoughts or experience on piston kits etc are welcomed.
My Cr 460 May have to go to make way for a more suitable big bore combination.
The suburban kits look inviting as do the 120 pistons from FM.

[bigcraig]

Also consider T-Man Performance. He offers a Wiseco piston kit that is coated in various compression ratio's.

[crewchief25H]

This is who machined my 117

https://www.facebook.com/jimsvtwinperformance/

[Prostock]

Can't go wrong with Mahle pistons. Suberban speed.

[VDeuce]

I have the SE cylinders and the Mahle pistons from Suburban with a TMan 226ps cam, HPI tb and SE CNC heads. Great combination. 120 inch.

Don't even think about it unless you do the Feuling or S&S pump and plate. Mine sumped only one time, and then I installed the Feuling race series pump and plate, no problems since.

[Sunny Jim]

There are some suburban kits getting around here. Everyone is happy.