Zippers Max-Flo

[Eglider05]

Have any of you with this unit routed the breathers to the atmosphere and how did you do it? I'm currently considering this kit but don't want (won't) to run them to the intake.

Which covers will fit?

Thanks,
Rick

[road-dawgs1]

I'm running the larger zippers filter on my SE backing plate.  I routed the breathers to the ground.  Just drilled and tapped the breather bolt standoffs where they attach to the heads and inserted NPT to barb fittings.  Then ran oil line to a tee fitting at the bottom of the filter and from there ran it to the ground.  I plugged the holes in the intake area by tapping them and inserting set screws with red loctite.

[7hogs]

I use stock cover and route it to the bottom of the engine between the engine and the tranny behide the clutch cable w/K&N filter

[WVULTRA]

Good info here:

http://harleytechtalk.net/htt/index.php?topic=7991.0