What size is fairing cig lighter opening? Looking for compatible USB outlet

[dmdrider03]

Anyone know what size the inner fairing hole is for the cigarette lighter. Nothing coming up on a search.
Some say they have enlarged there oem fairing hole to accommodate a USB port. Seems to be various sizes available online e.g. marine and mc application.
Would prefer a "plug and play" as opposed to modifying my painted inner fairing. (2003 FLHTCUI)
Thanks in advance.

(I already various interfaces for my battery tender plug and other)

[rigidthumper]

Instructions have you use a 7/8" hole saw to install the housing for the power point, so maybe this would be easier?

[dmdrider03]

Thanks. I saw that in the instructions for the power point installation on a side cover.
Still doesn't confirm the existing hole size in the inner fairings. I haven't taken my fairing apart yet and was going to place an order for an outlet. I was asking for someone that would have knowledge about the fitment after doing a similar upgrade.

[Coyote]

I think you'll find the hole will just clear 0.89" diam

[road-dawgs1]

Both ports are 3 amp, and backwards compatible with 1 and 2 amp devices.

https://www.amazon.com/SunnyTrip-Aluminum-Waterproof-Voltmeter-Motorcycle/dp/B07GTZ89NH/ref=sr_1_17?keywords=cigarette+lighter+dual+usb&qid=1556808884&s=gateway&sr=8-17

Have to do a little trimming but no biggie

[Coyote]

The problem with those USB ports is that connection doesn't hold up well to the bike environment (vibration etc). If it's something to be mounted on the bars, I prefer an power cord like this one.

[dmdrider03]

Thanks, I'll use that .89 measurement in my search till I get my fairing off.

[Coyote]

 [attach=0]

[bump]

Instructions have you use a 7/8" hole saw to install the housing for the power point, so maybe this would be easier?

That is what I use to charge my phone when on trips. $2 at Dollar General did 4700 miles without a problem.