Injector part number?

[nc-renegade]

Are the SE 4.89 g/s injectors the same as the Vrod ones?  Can anyone provide the part number?

[VDeuce]

You want these: 27654-06. They are not the same as the VRod injectors. Got mine for 39.96 each from Tri-County (talk to Jenni). They may have to be ordered from HD.

[nc-renegade]

You want these: 27654-06. They are not the same as the VRod injectors. Got mine for 39.96 each from Tri-County (talk to Jenni). They may have to be ordered from HD.

Thanks, I have a part number for SE ones 27796-08.  TR told me to get VRod injectors.  Trying to sort all this out.  Are the 27654-06 25 degree injectors and do they flow 4.89 g/s?

Regards,
NC

[Herko]

NCR.
p/n for VRod Injectors = 27665-01 or 01A $62.85 retail.
Flow "rated" at 4.81 gm/sec.
IMO you're on the right track with these too.

[nc-renegade]

NCR.
p/n for VRod Injectors = 27665-01 or 01A $62.85 retail.
Flow "rated" at 4.81 gm/sec.
IMO you're on the right track with these too.

Thanks Herko,
That is the part number I found as well, I just could not find the flow rate.

Here's a list of injector part numbers with flow rates:

27609-01, 27609-01A, 27609-01B = '01 to '05 stock injectors.  I have found flow rates stated 4.22 g/s to 4.35 g/s (B?)  The latter is good to 125 hp.
27665.01A = '01 & up VRod 4.81 g/s good to 160hp

27625-06 = '06 8 degree 3.91 g/s with 3-holes (100 - 105 hp)
27709-06 = '06 25 degree 3.91 g/s with 6-holes (100 - 105 hp)
27709-06A = '06 25 degree 3.91 g/s with 6-holes (100 - 105  hp)
27654-06 = '06 Hi-Flow 50mm TB 4.9 g/s with 3-holes
27797-07 = Same as 27654-06 but kit of two
27796-08 = Hi-Flow Injector Kit 5.3 g/s for 58mm ETC Body

Note: The 01 to 05 has a different injector wire connection than the 06 and up.

Earlier fuel injection:
27135-97 (Green/Red) 99-01  3.65 g/s
27218-95  '95 to '98  2.65 g/s

[RoadKingKohn]

Are you sure on this?

27709-06A = '06 25 degree 4.89 g/s with 6-holes

[nc-renegade]

Are you sure on this?

27709-06A = '06 25 degree 4.89 g/s with 6-holes

I am sure about everything except flow rate.  Looks like they are only 3.91 g/s as well.  I wil edit my post.

According to Service bulletin M-1185, here's a photo of the injectors:

[RoadKingKohn]

Are you sure on this?

27709-06A = '06 25 degree 4.89 g/s with 6-holes

I am sure about everything except flow rate.  Looks like they are only 3.91 g/s as well.  I wil edit my post.

According to Service bulletin M-1185, here's a photo of the injectors:

I got all excited there for a minute.  Thought I had the bigger flowing injectors.