Author Topic: 2009 Swingarm Rubber Isolator Removal  (Read 208 times)

0 Members and 1 Guest are viewing this topic.

Offline WhipLash96

  • Full Member
  • Posts: 1878
  • Country: us
  • No Mobiling Like HarleyMobiling
2009 Swingarm Rubber Isolator Removal
« on: April 27, 2021, 01:58:07 PM »
I'm working on a 2009 883. I have to replace the swingarm and I have it down to the rubber pucks and I have the left side off with the pivot shaft out. Now I need to remove the right side puck. Do I need to remove the link that is on the right side of the frame and connects to the engine case in order to remove the puck?

Thanks!
Thanks,
Whip

Offline newbie17

  • Member
  • Posts: 9
  • Country: us
Re: 2009 Swingarm Rubber Isolator Removal
« Reply #1 on: April 28, 2021, 11:57:38 AM »
The P/N: for your question is 99484-09, Service manual.
You won't regret it!

Offline WhipLash96

  • Full Member
  • Posts: 1878
  • Country: us
  • No Mobiling Like HarleyMobiling
Re: 2009 Swingarm Rubber Isolator Removal
« Reply #2 on: May 11, 2021, 06:32:23 AM »
The P/N: for your question is 99484-09, Service manual.
You won't regret it!

It's not my bike so I'm nt going to buy a service manual. :scratch: But I got the bike back on the road without it. Thanks.
Thanks,
Whip