05 Roadglide Trouble codes

[jimrookie]

Bike started missing, Pulled trouble codes PO1352 and P0562  Changed coil and wires then when cleared went for a test ride now it has  check engine and Codes P0373  P01352 and P01355. Should I replace the Crank Position Sensor or is there more going on? it will not run for more than 3 seconds and die

[Scotty]

Bike started missing, Pulled trouble codes PO1352 and P0562  Changed coil and wires then when cleared went for a test ride now it has  check engine and Codes P0373  P01352 and P01355. Should I replace the Crank Position Sensor or is there more going on? it will not run for more than 3 seconds and die

Sounds like more going on especially with P0562 which is displayed when battery positive voltage is less than 11.0 volts at 2000 RPM for longer than 5 seconds.
Start checking for broken, loose or rubbed through wiring especially to the coil and from the regulator.

[jimrookie]

Update on my code issue.after noticing an intermittent right turn signal and hand brake light not working started looking at a handlebar connection and as the kill switch also powers the coil. the connector had partially come apart. codes clear and problem solved. thanks for the input