S&S 475 cam and a good 2-1 exhaust?

[Adam76]

Hey, I'm picking up a 2021 Heritage with the 107 motor and doing a cam change.

I was going with the S&S 475 cam and a Pro Pipe, but I've read a lot of people say that this cam doesn't really kick in until 3000rpm and then absolutely takes off... That's not really my riding style - I like a wide TQ / power band from 2200 - 5000.

With the pro pipe, will I get more low end TQ back with the 475 cam? Or should I be looking at a different cam??

Thanks.

[FXDBI]

Both those items will void your warranty what were you planning on for tuning?  Bob

[Adam76]

Hi Bob,
I'm not really worried about the warranty.

I'm using a Power Vision for tuning.

Thanks

[Hossamania]

Here is all kinds of info on cams.
There is also another sticky above  in this section with cam resting.
The WM8-22x might be a better fit for your riding style.

https://harleytechtalk.com/htt/index.php/topic,102329.0/all.html

[Adam76]

Yes, thanks Hoss, I've read through that article. But I must say, Fuel moto makes every Cam look amazing     I can't tell much real world difference between the cams when you overlay them all on the graph.

Cheers

[JSD]

My mate has 475 in 107 softail seems ok with pipes & Cleaner & Tune. But the 465 will suit you better i feel. You don't get as much top end but  more torque at low end. Don't forget to change the Tappets & cuffs new inner cam bearing  full roller is in cam kit.

[Hillside Motorcycle]

We'd reach for a Red Shift .472 if it were here.