Malory ignition

[Reddog74usa]

Ended up gettin lucky and found a Pan. It has a Malory timer. Anbody have any info on these? Good or bad. Bike started on one kick and ran nice till the trans locked up. Now it's down to the frame. 

[Reddog74usa]

Found some very good info in the search. Thanks HTT... Looks like I'm going to pick up a spare module 6100-m and get the Mallory circut gaurd #29371 as it provides both clean up of signals and absorbes voltage spikes. I like the way it runs with this iggy set up.

[JSD]

Is it the A556 or A557 model 

[Reddog74usa]

How
 c
an I tell which model it is?

[cheech]

How
 c
an I tell which model it is?

The 557 is a dist with essentially a nosecone ignition in it.
Programmable curves and rev limit and all that.

The 556 is basic with mechanical advance and an electronic trigger.

[Ohio HD]

Holley owns the rights to them now.


556


557

[CraigArizona85248]

When I swapped my dual plugged heads for stock single plug heads last year, I installed a Mallory 556 ignition. Super simple install and starts easy. Very low tech compared to the PowerArc ignition I've run since 2004.

-Craig

[Reddog74usa]

Mine would be a 556. It's all I need on a Pan with 8.5-1 cr and an Andrews F cam. Not lookin to hot rod this bike.