April 27, 2024, 09:40:06 PM

News:

For advertising inquiries or help with registration or other issues, you may contact us by email at help@harleytechtalk.com

S&S Stroker wheels

Started by Wookie3011, January 28, 2023, 01:39:58 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Wookie3011

January 28, 2023, 01:39:58 AM Last Edit: January 28, 2023, 03:05:49 AM by Wookie3011
Got a set Of S&S 4.625 come through. Pushed out the wheels and seen this discoloration on the Conrods. Is this normal or bad news?
Thanks

RoadKingKohn

January 28, 2023, 05:48:03 AM #1
If the connecting rods were heat treated there should be some blueing of the steel.

Wookie3011

January 28, 2023, 06:26:29 AM #2
Good to know! Helping a buddy out with his build and wanted to be sure. I really appreciate the response.

rigidthumper

January 28, 2023, 06:30:55 AM #3
Looks like normal induction hardening.
Ignorance is bliss, and accuracy expensive. How much of either can you afford?

Wookie3011

January 28, 2023, 06:59:10 AM #4
Awesome Thank you!

FSG

January 28, 2023, 01:13:55 PM #5
can you take an up close pic of the left side ?



RoadKingKohn

January 28, 2023, 03:44:13 PM #6
Quote from: rigidthumper on January 28, 2023, 06:30:55 AMLooks like normal induction hardening.

That was the process I was trying to remember.  :bf:

Wookie3011

January 28, 2023, 04:24:59 PM #7 Last Edit: January 28, 2023, 04:36:36 PM by Wookie3011
Quote from: FSG on January 28, 2023, 01:13:55 PMcan you take an up close pic of the left side ?





I dont have it in front of me right now but will tomorrow. I did a video and have a few stills I took from it.  The splines are pretty chewed up.
User actions
Print
Go Up Pages1