April 27, 2024, 08:04:16 AM

News:

For advertising inquiries or help with registration or other issues, you may contact us by email at help@harleytechtalk.com

blowen eng

Started by No Problem, November 14, 2023, 10:34:57 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

No Problem

November 14, 2023, 10:34:57 AM
did top end all new now the bottom end went 70,000 is this normal 97 e g 1340 couldnt find anthing but wear  bike sat for yrs

chrisflhtc

November 14, 2023, 11:47:09 AM #1
Pretty much. Fresh tight top end stresses the bottom end I did the same except it was a fresh top end on 105K bottom end. It ended up pushing a wrist pin out of the piston.
C

smoserx1

November 15, 2023, 05:19:35 AM #2
I don't know about an Evo but I have a twin cam and did a top end at 179000.  The bike now has 241000 and the bottom end seems fine.

motorhogman

November 15, 2023, 01:07:09 PM #3
Quote from: smoserx1 on November 15, 2023, 05:19:35 AMI don't know about an Evo but I have a twin cam and did a top end at 179000.  The bike now has 241000 and the bottom end seems fine.

Geeesh !  You now have double the miles I have on my 2001 FLHT.  Glad that 99' is holding up so well !
where's the points and condenser ?<br />Tom / aka motor
User actions
Print
Go Up Pages1