Why diffrences maps in WinPV and C3 Software

[Fatboy1994]

Buyed now a Powervision 3 for our Sportster XL1200T Superlow. Read the file from the ecu and open it with the C3 foftware.

Have also downloaded the WinPV soft and a stock improved file from the dynojet website.

Why i can see in C3 software not so much maps as in WinPV ?

Will change the closed loop lambda range map, but in C3 there is not available.
You cannot see attachments on this board.
You cannot see attachments on this board.
You cannot see attachments on this board.

[hrdtail78]

Is there a box in upper right hand corner of the screen to check to not ignore?  What do you want to change it to?  Already has a low of 14.15 which is out range for the accuracy of a stock non heated narrow band.

[Fatboy1994]

Got today an answere from Dynojet USA

The C3 Tuning Software restricts access to more of the tables for those customers that are not tuning professionals. This restricted access has allowed us to sell the product to more areas

So i would need the "Pro Premissions" to see all maps ?

https://www.youtube.com/watch?v=EU2RvF02Zkk&t=58s

look at 1:00

[hrdtail78]

Makes perfect sense to me.