New comment „-IGNORED-„ in PV tables?

[Karl H.]

After updating the PV firmware I find a new comment ,,-IGNORED-,,.
Does anybody know what this means?

You cannot see attachments on this board.

[hrdtail78]

Yes, the calibration is not going to change these setting in the ECM and they are going to stay default.  If you open each one.  You should see a box that can be checked in upper right corner.  This will take the ignore away and allow you to adjust these settings.

This might also be based on what program you are using.

[Karl H.]

Thank you for the helpful advice!