Clutch hub bearing

[HighLiner]

Always seems like there is something better than what the MOCO uses.  So is there an upgrade of the clutch hub bearing 37906-90?

[smoserx1]

Just Google that part number.  When I replaced mine it was about $90, lots of the aftermarket ones are a lot less and that does not mean they are better.  The stock ones are open (you can see the insides) many of the aftermarket are not, and I would avoid one of those since it can't get oil from the primary (or al least not as much).  Just my 2 cents worth.

[Ohio HD]

SKF 5207 C3, double row ball bearing is open, no seals.

[FSG]

or  KOYO 5207 CD3       depending on what's in your neighbour hood

[Ohio HD]

I think also a 3207 is the same size. too lazy too look right now.   

[boooby1744]

Perhaps worldwide bearing has ceramic hybrid.

[Ohio HD]

I think also a 3207 is the same size. too lazy too look right now.   

SKF 3207 CD3 is listed in US measure, close enough for government work.

Outer Diameter: 2.8346"  (71.99884mm)
Inner Diameter: 1.3780"  (35.0012mm)
Width: 1.06259"  (26.989786mm)

[Dan89flstc]

Always seems like there is something better than what the MOCO uses.  So is there an upgrade of the clutch hub bearing 37906-90?

Is there some evidence of OEM clutch hub bearings failing prematurely, over the past 50 years or so?

 

[HighLiner]

Always seems like there is something better than what the MOCO uses.  So is there an upgrade of the clutch hub bearing 37906-90?

Is there some evidence of OEM clutch hub bearings failing prematurely, over the past 50 years or so?

No idea but I need one for a new build.

 

[Ohio HD]

I grabbed a few photos of the SKF bearing while in the shop. Last I remember these are about half of what the OEM price is. You may have to shop to get that price.

You cannot view this attachment.

You cannot view this attachment.

You cannot view this attachment.

[blown alcohol]

Always seems like there is something better than what the MOCO uses.  So is there an upgrade of the clutch hub bearing 37906-90?

HighLiner, PM or post if you find a good price on this bearing. I bought a used 2001 model 3.37 gearing and will replace this bearing