News:

For advertising inquiries or help with registration or other issues, you may contact us by email at help@harleytechtalk.com

Main Menu

1985 xlh

Started by qazzy, August 15, 2009, 04:59:27 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

qazzy

i just rebuilt the carb on my 1000,its hard starting,back firing,flame out the exhaust,and carb help!!!clean the rotor,started good idledgood shut it off waited 15 mins same thing again?/ can any buddy help/

qazzy

it ran fine,before 50-70 mph,i wanted to rebuild the keihen carb because of hard starting,poor performance,getting proper spark,top end just got rebuilt,put the carb back together right,seems that its not getting enough gas to the plugs though,,

qazzy

Quote from: qazzy on August 15, 2009, 04:59:27 AM
i just rebuilt the carb on my 1000,its hard starting,back firing,flame out the exhaust,and carb help!!!
i looked the my manual and decided to look at the rotor it was rusted and covered with white stuff sanded it off starts fine now need to adjust the jets,anyone have an idea on the middle range jet?

wreck74

just run the air/fuel mix screw in till it starts to stumble, then back it out about a 1/4 turn, all should be good. unless someone has put bigger jets in it.