Online source for S&S

-JC-1 · August 28, 2009, 05:34:08 PM

Can anyone recommend an online source for S&S? (tools)
The first thing i need is their 2 piece socket kit to remove their compression releases- part # 53-0045

TIA
joe

Don D · August 28, 2009, 05:38:40 PM

If you are interested you can build one. Sachs has instructions in the DIY tools section of this site, IIRC
http://harleytechtalk.com/htt/index.php/topic,1200.0.html

wfolarry · August 28, 2009, 05:59:41 PM

S&S doesn't allow online sales.

-JC-1 · August 28, 2009, 06:15:03 PM

Thanks for the replies- maybe I'll get my die grinder out and go
to work on a socket- sounds like a good Friday nite project

-JC-1 · August 28, 2009, 06:56:42 PM

just measured and i need a 1" deepwell standard, an impact has too thick sidewalls to fit in the recess- on to plan b

11.7to1 · August 28, 2009, 08:07:54 PM

Just going to throw this out there. What's wrong with a box wrench.

RevFastEddy · August 28, 2009, 08:21:19 PM

It is too deep for an offset box wrench... Takes about 3" offset plus you need to be able to turn it down or remove it with the wires attached.

Give Jenny a call.. she got me my S&S sockets on my 124 build.

11.7to1 · August 28, 2009, 08:33:27 PM

I knew there was a reason I used the ones from Husqavarna

HarleyTechTalk

News:

Online source for S&S

-JC-1

August 28, 2009, 05:34:08 PM

Don D

August 28, 2009, 05:38:40 PM #1 Last Edit: August 28, 2009, 05:41:49 PM by Deweysheads

wfolarry

August 28, 2009, 05:59:41 PM #2

-JC-1

August 28, 2009, 06:15:03 PM #3

-JC-1

August 28, 2009, 06:56:42 PM #4

11.7to1

August 28, 2009, 08:07:54 PM #5

RevFastEddy

August 28, 2009, 08:21:19 PM #6

11.7to1

August 28, 2009, 08:33:27 PM #7