I need oil line part #

[48pan]

I need the part number for a small (1/4" diameter) oil line that connects between the oil pump and a "T" fitting. The oil line is only about 2.5" long and is 90 degree.
It's a "77 FX.

I also hear that you shouldn't use gas line for oil line.

Thanks

[Lew]

I see no specific part number for a 90 degree piece of 1/4" hose.  There is a part number for 1/4" hose but it states it is a 25' bulk roll.  This is for the chain oiler to T-fitting.

Lew   

[autoworker]

If a straight piece will work I'll send you a 3in. piece,nc.

[48pan]

I tried heating hose for oil,then bending it not much kuck. I ended up just capping both lnes off. I just finishd fixing my shifting problm. While I was there, I bypassed the oil that circulates thru the primary. I took her around the block to see how the tranny works without going to far without getting the oil lines fixed. I think I'll be ok with the lines capped off.

Safe riding to all