T-max map help

[Quick_2s]

Here is what I have;

04 Duece 114"
Stock Stroke, Balancers removed, Tiged, plugged, balanced.

4.25" Domed CP 12-1 coated pistons 21.51cc dome volume

Heads are 1.8 intake runner 2.1" intake, D-port exhaust 1.7"
Chamber is 96cc, .650 lift max.
Singh Grooved
.030 Cometic head gaskets
(I could give you the flow on the heads if I could get the image to post)

Cams 647 Gear Driven with 4 degree Woods advance key
INT          26/106/58     Duration 264   Lift .647   TDC Lift @ valve  .211
EX           58/106/26    Duration 264    Lift .647   TDC Lift @ valve  .211

Throttle Body
55mm body, 58mm manifold, 6.19gps injectors

V&H Pro-Pipe with punched baffel (knocked out center part of baffel as per V&H instructions for large bore motor)

CCP is 230ilbs. per hole

Just looking for advice on a good starter map, attached is the one I'm running now.


[attachment removed after 60 days by system]

[Quick_2s]

Here's the flow on the heads.

[attachment removed after 60 days by system]