Xied from Nightrider

[chiefster23]

Anyone know what the value of the resistor used in this 13.8 A/F setup is?  I have the 14.2 A/F ratio units already installed in my bike.  I have an old screamin eagle air cleaner I plan on installing for a tryout.  I figured I could remove the resistors in the 14.2 units and solder in new resistors to change the harnesses to the 13.8 A/F ratio units for a test drive to see if this whole setup is going to work.  Cheaper than spending $99 to find out the bike still runs too lean.  Thanks in advance.  Bruce