Having trouble with PC install on Dyna?

[biggums]

For those out there that have installed the PC in your Dyna I need help!

I have installed them in FL's but never in the tight spaces of the Dyna.

I went to plug in my new PC 5 in my 09 Fat Bob. After unbolting the electical box and taking the seat off I was able to undo the stock ecm plug and pull it back. Then I routed the PC ECM from the rear up and plugged it in. That was where it ended. There was not way i could bend, pull, strong arm the stock plug into the black PC plug. No room in there!!

I was afraid if I bent the cables too hard or pulled to hard I would end up screwing the electrical.

Any advise would be appreciated. I understand what plugs into what the problem is dealing with the lack of room.

Thanks

Biggums

[biggums]

OK, I figured it out and it runs like a rapped ape!