roadking rims

[scooterthrash]

I would like some info on road king axle dimension . I want to put a 2007  r.k. mag on my 2001 rk.  Seems that in 2004 they changed the size, went from a 3/4" to 1" axle. Can I just change bearings and put mags on. different info from shops. Don't want to buy rims then not work out. thanks

[ULTRADOG]

 i just changed bearings ,spacers inside and outside no problem

[Trouble]

What about where the axle(s) go through the swingarm and lower legs?

[bladerunner]

  Front axle and bearings are the same  1 inch .  Rear wheel bearings and spacer will have to be changed to  3/4 inch to fit the` 01................bladerunner

[scooterthrash]

Thanks guys, have a happy holiday

[scooterthrash]

Do I need to think about tire size. Didn't harley change tire size in 07 or 08.

[bladerunner]

 The   `07  wheels are the same  rim width as your `01 . You could use  your 130 mm, or go to a 140 mm with  a sprocket spacer  ,like the pingel  .  There are other  spacers available . I just put  07 wheels on my `01 Eglide  . I went with a 1 1/8 belt and 1 1/8 rear pulley , and a 150 Avon .  The new  bikes are using  narrow belts and  seem to be ok...time will tell.............bladerunner