Can't find info on Compensator nut shim

[flht99b]

I believe the compensator nut on my '03 Ultra may be loosening up and was using the search function for the site but was unable to bring up any of the different thickness compensator nut shims P/N's.  Anyone have those numbers handy ?? TIA...ED M.

[Billy]

.090" shim, HD part # 24033-70

[FSG]

HarleyTechTalk > Documents & FAQ's > Instruction Sheets that have been found > HD > Tech Tips > TT122, Oct 29, 2003 â€" Engine Noise and Vibration Complaints

HarleyTechTalk > Documents & FAQ's > Instruction Sheets that have been found > HD > Service Bulletins > M-1170, Compensating Sprocket Torque Procedure


IMO your better off cutting the nut

[djl]

I believe the compensator nut on my '03 Ultra may be loosening up and was using the search function for the site but was unable to bring up any of the different thickness compensator nut shims P/N's.  Anyone have those numbers handy ?? TIA...ED M.

There is a .030" and .060" shim but I have lost the PNs; still looking.  I read somewhere that the .030" is not offered any longer but that some dealers still have some in inventory.  If I can find the PNs, I will post them.

[03deuce]

Here is the part no. I have for the .060 spacer.

24032-70 SPACER .060

[Mike52]

The shims are getting harder and harder to get from HD, they have discontinued several of the part numbers. You gotta remember, these shims weren't designed for the compensator, they were used on Shovelhead trans.  Good luck on finding them. I would do as SirGarfield suggested, shave the nut down .030"-.050"

Mike

[Tattoo]

<img src="http://i100.photobucket.com/albums/m18/tattoo66/scan0005-1.jpg?t=1230640234">;

[Herko]

A lubed 24033-70 under the nut head.
Few drops of red on the threads.
Torque straight to 165 ft lbs...99-06 models.
Works great.

24032-70 is now technically obsolete but a few may still be around.