Thicker valve shims for SE cams

[04 SE Deuce]

  Anybody know where to get 3.9,  4.2,  5.0,shims needed when installing SE cams in a V-Rod?       Thanks, Rick

[burgies08ultra]

h-d would be my first guess..

[04 SE Deuce]

  Dealer is the one looking for them.  These are thicker than the normal shims HD offers,  I know something sounds amiss here.  Thanks,   Rick

[Hal64hd]

Try here,   http://www.fitzgeraldmotorsports.com/

[Tbones]

Here's where I got my shims for my rods.

http://www.procycle.us/hotcams/valve_shims.htm

[brunothedog]

  Dealer is the one looking for them.  These are thicker than the normal shims HD offers,  I know something sounds amiss here.  Thanks,   Rick

HnD's shims go up to 3, for some reason with the stage II cams, you may need larger shims, Call scott from fitzgerald for individual shims or get the complete kit from procycle

[04 SE Deuce]

  Thanks Guys,  Have a call into Scott Fitzgerald......will see if he has/knows were to get them.    Rick

[Hal64hd]

Here's where I got my shims for my rods.

http://www.procycle.us/hotcams/valve_shims.htm

That kit only goes to 3.20. There have been quite a few that need larger shims when installing the SE II cams

[Tbones]

Here's where I got my shims for my rods.

http://www.procycle.us/hotcams/valve_shims.htm

That kit only goes to 3.20. There have been quite a few that need larger shims when installing the SE II cams

Yup, you're right, my bad.  The OP was looking for thicker shims but sounds like Scott will fix him up.  Scott's a good guy right, he fixed me up.  Give him my regards.