motor cycle jacks or lifts

[ultra 08]

 I am thinking of getting a cycle jack I think it would be handy for washing the bike. My son gave me on for Christmas a year ago but the lifting arms are so short it does not reach both sides of the frame I think it is for 4 wheelers so it is no good to me. I would like some input from some of you people.

[Panzer]

Take that jack to a welding shop and have longer arms put on.
Save some $$$ maybe.

[ultra 08]

thanks Panzer I actually thought of doing that my self just weld a piece of tube steel on and then putting a strip of conveyor belting on the box steel. 

[moosemush]

You might want to look up the model # of the jack you have to be sure it can support the weight of your bike. If it was made for a quad or a dirt bike it may only be rated for 500 lbs or so. Also make sure the hardware holding it together is hardened. I've heard stories of cheaper import jacks collapsing because the bolts sheared under the weight of the bike.

[Bakon]

Pitbull

Lifetime guarantee and no straps needed. Can climb on bike on lift without straps. About 200 more than cheaper lifts but worth it.

[Justpassingas]

Well I'll put my plug in for the Sears lift......I've had it for years and never had a problem,reasonably priced too....

[dakota224]

Sears Craftsman bike lift   

[IndyHarley]

you can get jacks that might be considered inexpensive (a relative term) that fit HDs from $60 on sale all the way up to $1000.

Craftsman/Sears lift.
Greg Smith Equipment lifts.
Handy Lift
Direct Lift

All of which are probably good for non-commercial/industrial use depending on your needs and your cash flow.

I've used them all and have seen them all used by others - each individual that I knew had no complaints.

[chaos901]

Another plug for the Craftsman Bike Lift, never had a problem with it.

[Snuff™]

I still use all of mine I've bought over the years.

Craftsman-Red/Black
Dolley-Homemade
Greg Smith-Jack
Handy-Sam1000

I've never tried the Craftsman Yellow/Black lift as it looks as if it would be easier to store away.

-Snuffâ,,¢

[ultra 08]

Thanks for all the input guys I never gave it a taught that my lift might be to light to do the job its a good point. Thats just what I would want is to have the bike in the air and then have the lift give up the ghost. 


                                                                        Thanks again guys its response like this that makes this site the best.

[Oiltrash]

j&S Jacks work very good,easier to use, like the video shows, $$. Have one and very pleased. Used the Sears, still have it.

[Old Crow]

Pitbull

Lifetime guarantee and no straps needed. Can climb on bike on lift without straps. About 200 more than cheaper lifts but worth it.

I went by their factory in Tenn. a few years back.  Saw the shop and their demo and I'm a believer.  That being said, I've used a Craftsman clone(AC Delco)from O'Reilly's for a few years with no problem.  If I ever win the lotto, I might buy a Pit Bull.

[76shuvlinoff]

I know we're talking jacks but I can't help myself, got this lift last week.  Added a couple 2X10s to the sides until I can swing the extensions and I added safety step tape to the ramp.
Excuse the winter dust on the bike. I was grinning so hard I didn't even see it. I've been working off a Sams Club jack for about 13 years, not any more if I can help it. 

[northbrun]

if your gonns get a jack.. spring the extra $ and get an alum. one. I,vie had the steel jacks and fount a deal on a sears alum jack, and now I wonder why I ever bought a steel jack. It about 1/2the weight, and so easy to move around and carry.store. you,ll be happy uoi did.

[Jim Bronson]

j&S Jacks work very good,easier to use, like the video shows, $$. Have one and very pleased.

[Glide-Rider]

I first had the pipe type lift that you put under swing arm and it would lift your bike rear section maybe three inches.  Went to a Sears lift, which I still have and use but had hard time changing oil.  It works great for other type repairs.  Went to a Handy Lift in 02.  If I had to do all over again?  I would go straight to a Handy Lift.  To be fair, one would also need a flat type jack.  It is also made by Handy and I use it to raise the bike up when changing out rear tire among many other type of repairs.  I have experienced that one needs more than one type of lift or jack to do majority of work on my bike..  Changing front motor mount I used Handy lift to get the bike into the air and then a flat type jack to I could replace the front motor mount or front or rear tire removal or when the oil pan needed to be replaced after a piece or re-barb punctured a hole in it.

[Rags722]

OK, I may take some flak from the Harbor Freight, Sears, Costco guys on this, but I have broad shoulders.
About 15 years ago my wife got me a BlackJack for my bike.  In looking at the PitBull, it looks almost identical to the BlackJack in construction. http://www.pitbullmotorcyclelifts.com/

I will say this about the BJ/Pitbull.  It has a WIDE footprint and the arms are long enough from the start to assure about 2 inches of overhang on either side.  Sure, you can always weld on extensions to your low buck jacks, but you can't do much about the footprint, and that is what gives the high end jacks stability.  I'm kinda sensitive about big heavy things falling on me ever since the lift system on my buddy's motorhome failed and 17,000 lbs of angry iron bounced on me.  I'd hate to see anyone here get hurt because a bike got unstable on a jack and fell on them.

Now, in all fairness, the Pitbull can lift the bike 25 inches in the air and the econo-jacks can't come close to that.  However, on my BlackJack I do notice the arms are much more stable when locked in the full upright position.  I suspect that is because at the first stop, they are long arms holding weight at a funny angle, and since the arms on the econo-jacks are shorter, they are more stable at a partial lift position.

If you are new to using hydraulic jacks, just keep two things in mind.  The bottle jack is used for LIFTING, not for HOLDING.  When lifting a bike, let the safety stops both click in past the height you want and then lower the bike back to the safety.  Never trust the seal in the jack with your life.  Also, when you lower the bike for the first time, be darned sure you lower it slowly.  Too much turn on the release screw can make for a real interesting landing!

Rags

[76shuvlinoff]

[quoteAlso, when you lower the bike for the first time, be darned sure you lower it slowly.  Too much turn on the release screw can make for a real interesting landing!
][/quote]

....and make sure that side stand is out especially if you're standing on the opposite side... 

[hbkeith]

i use a craftsman to wash my bagger,got it for $69,I strap bike to it. i use my air table lift (complete motorcycle lift brand) to work on bikes ,paid $650

[Lakerat]

I'm considering this one to replace my Sears Yellow because of it's lowered height and 17" skid length. Anyone ever had experience with OTC products? Summit has a better price than the one in the link.
http://www.thetoolwarehouse.net/p-4124-otc-1545.aspx

[serider]

Lakerat, Never had any experience with OTC motorcycle jacks, but after close to 30 years selling tools I have never seen any OTC products that were junk. I have sold a lot of their hydraulic products with no problems at all. OTC is part of the SPX group and is a huge corporation. SPX makes normal hand tools as well as specialty tools for almost every vehicle manufacturer in the world. Their Kent Moore brand is used by automotive, truck, marine, snowmobile, motorcycle and heavy equipment mechanics everywhere. A little long and OT here, but if the jack meets your needs I wouldn't be afraid to own one.

[CPTMorgan]

K&L has some great products... kinda spends, but worth it... here's what I use:

K&L "FatJack" can be used just as a jack or to lift the bike onto the K&L "Shop Dolly"... with the dolly you can strap the bike to it and roll it around freely in any direction

[Old Crow]

I've got a dolly like that I use for my long term work.  I love it.  Mine came from Harbor Freight, but I don't see it in the catalog anymore.

[Tbones]

I've got both the K&L lifts and the Craftsman jack.  If you can afford it, the lifts are the only way to go.  The jacks are better than nothing but you still have to stoop over to do work plus they aren't as stable as a lift is.  I also purchased the blackjacks sisser lifts http://www.gregsmithequipment.com/Black-Jack-1000-p/tpbj.htm

[BKACHE]

Did you take a look see in the Homemade Tools forum?
In there 'Homemade Lift/Bench has a neat looking ride up on bench.
The middle section can be taken out for more access.
With some additional tought the 3 sections could even be nested for storing.
Just a thought.

[Brrrap]

I know we're talking jacks but I can't help myself, got this lift last week.  Added a couple 2X10s to the sides until I can swing the extensions and I added safety step tape to the ramp.
Excuse the winter dust on the bike. I was grinning so hard I didn't even see it. I've been working off a Sams Club jack for about 13 years, not any more if I can help it. 

76Shuvlinoff, That looks to me like mine. "Directlift" that I purchased through Greg Smith Equipment. I have two of them in my garage and have nothing but good to say about them,and we use them alot. Pneumatic is soo much nicer than the Hydraulic ones I had prior! I belive that total price including shipping to the truckdock at my factory was $630.00each

[76shuvlinoff]

Brrap

That's the Direct lift Procycle DT (Drop Tail). In that pic the ramp is laying on the table behind the lift.

You got a better deal than I did. It was $625 but by the time I got it shipped I was at $797. When I got it home I decided I wanted their Blackjack scissors jack so add another $123 (including shipping) for that. The complete extension kit is $225 but for now I spent $50 on a couple treated 2x10s, 3 hunks of 3/4 black pipe, some hardware and a roll of step safety tape for the ramp.

I rubbed winter off the old girl and left her sitting on the lift, tonight my wife came in from the barn and told me that's not a bike table it's a trophy case.

[CraigArizona85248]

Mark,

Give it some consideration before you drop another $200+ on extensions.  My neighbor has the extensions and they make it a real pain to work on the bike.  Keeps you standing too far off to the side.  I have to reach so far that is makes my back hurt which defeats the purpose of the table lift.  They are handy to have if you want to work on a quad or lawn tractor, etc.

-Craig

[PoorUB]

Mark,

Give it some consideration before you drop another $200+ on extensions.  My neighbor has the extensions and they make it a real pain to work on the bike.  Keeps you standing too far off to the side.  I have to reach so far that is makes my back hurt which defeats the purpose of the table lift.  They are handy to have if you want to work on a quad or lawn tractor, etc.

-Craig

I have the Directlift, drop tail, and extensions. I leave the extensions on most of the time. A couple clips, and the extensions pull right off. The extensions are nice to ride the bike up and have somewhere for your feet. Doing service work on the bike I usually leave them on and sit in an old office chair. When I tore down my '05 and did the big bore and cams the extensions were removed.
If I were to buy the lift again I would buy extensions.

[76shuvlinoff]

I'm kinda hijackin the thread here , sorry that was not the original intent. I am just goofy glad to finally have a lift.

Craig, PoorUB,

The 2x10 planks I used for side extensions will suffice unless I locate some FREE aluminum channel, that might be a little lighter to manhandle around. I did set it up so I can pull a 3 lynch pins and drop them off either side. They make a great place to set stuff while working on the bike not to mention a place to put my feet when riding the bike up on it. I can see why you would not want them there if muscling heavier components out of the frame.

This lift will not handle my tractor but for the bikes, 4 wheeler, maybe the wife's smaller horse drawn carts, I'm already in love.
... and on that note I have an all balls starter for the shovel wanting into the game this weekend.

- Mark

[acbacb]

Sears Craftsman works well for my needs.

[Old Crow]

Found another use for my jack yesterday that a table wouldn't do.  Makes a pretty fair automotive transmission jack too.  Much more stable than the floor jack I usually use.

[davem]

i got the sears craftsman jack and it works great for getting my SG up in the air.got it on sale for $89 and had another $10 off that so for $79 got a nice jack.

[ultra 08]

Thanks for all the input guys after giving it some thought I wanted a jack with a big foot print so it is real stable. After reading your post and checking out some of the makes that were suggested I received my bike jack that I ordered last Thursday. It came by UPS today. I know you are asking, I ordered a jack from J&S jacks I was very pleased with the response I got when I talked to them on the phone and I am very pleased with the lift.