SE-255 CAM & SE LIFTERS INSTALL IN A 2007 DYNA FXDL

[Rod4017]

I BOUGHT THE CAMS AND LIFTERS FOR INSTALL IN MY DYNA LOW RIDER WITH 32.5KMILES.  I DO NOT WANT TO PUT THE 103 CU.IN. KIT IN. CAN YOU PUT THIS SE-255 CAM IN WITHOUT RE-MAPPING THE BIKE FOR SE-255 CAM/103CU.IN. BUILD, AND WILL IT RUN WELL?  I ALREADY HAVE A STAGE ONE KIT IN WITH THE MAPPING FOR STAGE 1.  I HAVE A K&N FILTER AND SE-II EXHAUST ON THE BIKE ALREADY.  I WAS LUCKY TO FIND THE SE-II PIPES! I LIVE IN SAN DIEGO, CALIFORNIA AND THE CAM IS EPA LEGAL!

PLEASE ADVISE, THANKS...

ROD4017   

[crazycalvin]

I think you might need a tune.  Later, Calvin.

[skyhook]

that cam has similar timing events as the stock cam, but you're still taking a chance...a good dyno tune is really the best thing you can do for a bike, even if it's completely stock...if you do have it tuned, be sure to find a tuning center that maps the fuel for both cylinders individually AND builds a custom ignition map