Cam Gear Removal & Install

[gaillarry]

Installing an EV27 and need to remove the old stock cam gear to put on the EV27. Whats the best method to removal/install cam gears without buying the expensive tool?

[egstandard]

A press works great if you have access to one.

[choseneasy]

Make sure to scribe a mark on the cam gears from the notch on the cam to keep your timing close.

[jsachs1]

gaillarry
Check the EVO forum,there was a discussion a week or so ago about it.
John

[gaillarry]

gaillarry
Check the EVO forum,there was a discussion a week or so ago about it.
John

Thanks, guess I'll make myself a homemade press.

[gaillarry]

Its a 2 hr drive to the dealer and I hate winter driving !!!

[JBarrettB]

I might try using a large c-clamp. Put the clamp in a vise and then the cam and gear in the clamp. if you shrink the cam and heat the gear it should slide right together.
I use a press, but if I didn't have one...

JB