New ultima cam MW268 Specs

[hrdtail78]

This is thier new cam for thier 140.  Anybody know the specs of this cam? 

[TheSwede]

hrdtail 78,,, Why not go to Ultima web site
and look for it yourself

Best Regards
TheSwede

[hrdtail78]

hrdtail 78,,, Why not go to Ultima web site
and look for it yourself

Best Regards
TheSwede

Tried.  I could only find info on the MW264.  The MW268 is new in the 2009 catalog this year and the only one the catalog doesn't show specs for.  Couldn't find it on the net either.  I understand a lot of questions can be found researching the net.  I had no luck this time.  So.... I asked here.  There are people on this site that have probably Dyno'd this 140 engine for the catalog and hopefully have the specs for this cam.

[TheSwede]

Here is the specs
Regards
TheSwede

[attachment removed after 60 days by system]

[hrdtail78]

 Still looking for the specs on the MW268 cam.

[hrdtail78]

All timing information @ .053 tappet lift using 1.625 rocker ratio

# 114-68
# 114-246
# 114-245

GRIND
MW520
GRIND
MW248
GRIND
MW264
INTAKE
OPEN / CLOSE
28 / 54 INTAKE
OPEN / CLOSE
18 / 50 INTAKE
OPEN / CLOSE
24 / 60
EXHAUST
OPEN / CLOSE
69 / 23 EXHAUST
OPEN / CLOSE
54 / 18 EXHAUST
OPEN / CLOSE
68 / 20
DURATION
INT. / EXH.
262 / 272 DURATION
INT. / EXH.
248 / 252 DURATION
INT. / EXH.
264 / 268
LOBE CENTER
INT. / EXH.
103 / 113 LOBE CENTER
INT. / EXH.
106 / 108 LOBE CENTER
INT. / EXH.
108 / 114
VALVE LIFT@
.520 / .520 VALVE LIFT@
.600 / .580 VALVE LIFT@
.625 / .580
OVERLAP
51 Degrees OVERLAP
36 Degrees OVERLAP
44 Degrees
TDC LIFT
.209 / .194 TDC LIFT
.181 / .121 TDC LIFT
.218 / .200
LOBE SEP ANGLE
108 LOBE SEP ANGLE
107 LOBE SEP ANGLE
111

I only see 3 cams.  No MW268.  Thanks for the effort.

[TheSwede]

Yes hrdtail 78  now I opened my eys
MW 248 is not MW 268

Best Regards
TheSwede