Timing mark ?? on stock '03 cams

[HDSlowride]

Never have re-installed stock cams back in a cam chest and now that I'm about to....there are no punch marks on the ends of the cams like all performance cams have. What do you use to time the cams in the inner cam chain? There seems to be two very small parallel lines ingraved into the end of the cam on the outer bearing ends but no punch marks on the teeth or the ends of the cams. Gives me a very uneasy feeling. What do you use?

Thanks

[03deuce]

Yes, you have it correct.  Line up the small pin stamped timing lines on the outside end of the cams with a straight edge and you're good to go.