Shop insulation

[Tre_11 FLHX]

I built a 24x24 shop, I used the exterior house wrap that went over the OSB, and then Bricked it. on the inside I used the insulation cloth, and then cut an X in the top and bottom of the cloth and blew Fiberglass in between each void. once that was done I used OSB on the walls-screwed in, not nailed in case i wanted to remove for addition wiring- etc..I also used insulated garage doors on both ends, built so I could drive thru if necessary.  Only wish I would have made it bigger!!

Mike

[Snuff™]

Mark222,

I installed a QMARK (MUH-10-21) heater (Grainger use to sell these) in my 26'x36'x9' shop. I keep it set @ 54 deg. Weekday evenings when i'm in the shop, it can bring the temp up quick.  Weekends i fire-up the buck stove.  If you need further info, let me know.

-Snuff