May 04, 2024, 12:22:29 PM

News:

For advertising inquiries or help with registration or other issues, you may contact us by email at help@harleytechtalk.com

Intake Flanges/Newer heads

Started by Deye76, January 06, 2009, 04:14:25 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Deye76

January 06, 2009, 04:14:25 PM
I have a HPI 51mm TB with 1.710" intake runner, and am going to newer heads. Will the factory flanges, #26993-06 and seals work? Or do I have to buy from HPI?
East Tenn.<br /> 2020 Lowrider S Touring, 2014 CVO RK,  1992 FXRP

Showdog75

January 06, 2009, 05:28:37 PM #1
You'll have to buy flanges from HP Inc. . They are different than stock . Already been down this road .

Mike52

January 06, 2009, 08:25:12 PM #2
Quote from: Deye76 on January 06, 2009, 04:14:25 PM
I have a HPI 51mm TB with 1.710" intake runner, and am going to newer heads. Will the factory flanges, #26993-06 and seals work? Or do I have to buy from HPI?

As Showdog said, you'll have to get the flanges and seals from HPI for their intakes, stock HD will not work.

Mike
Mike52   Tampa Bay,FL
www.harleytechtalk.net

Don D

January 06, 2009, 11:09:11 PM #3
Mike
I have used them, the HD flanges but it took S&S thinner seals to get the fit and seal right.

Deye76

January 07, 2009, 04:55:56 AM #4
Quote from: Showdog75 on January 06, 2009, 05:28:37 PM
You'll have to buy flanges from HP Inc. . They are different than stock . Already been down this road .

Show, do you have a part # for the HPI stuff? Thanks.
East Tenn.<br /> 2020 Lowrider S Touring, 2014 CVO RK,  1992 FXRP
User actions
Print
Go Up Pages1