May 09, 2024, 09:19:23 AM

News:

For advertising inquiries or help with registration or other issues, you may contact us by email at help@harleytechtalk.com


prep for dyno tune

Started by jazzman713, January 09, 2009, 01:55:38 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

jazzman713

im getting ready to have a good tune and want to know if there is any kind of prep before this is done thanks

autoworker

Fresh spark plugs,clean air filter,throttle cable adjusted,no exhaust leaks,belt adjusted not too tight,tires aired up,engine not too full of oil.
It must be true,I read it on the internet.

ejk_dyna

and then after all the real tuning is done...

inflate the tires to 50lbs, take off the air cleaner, put in 106 octane race gas and advance the ignition curve 3-4 degrees and get the run in STD correction... :wink:  just kidding, sorta...  :embarrassed:

Kansas

Stop by the bank and fill up your wallet.

WVULTRA

'07 ULTRA, AXTELL 107"/BAISLEY SS HEADS/HPI 48/DARKHORSE CRANK/RINEHART TDs/TTS