Flh Pasing Lamp is loose

[flhs90]

Evos, Please advise:

I took off the turn signal allen screws. There is a nut up inside the passing lamp/turn signal mount with the hot wire going to the passing lamp. Just how do I get a wrench or socket up in there to tighten the nut with the wirerunning through the middle of the nut? Both lamps are just wobbling along aimed off to nowhere.

Thanks in advance.

[FSG]

Check this thread  Clearance lights 96 Heritage in HarleyTechTalk > General & Model Specific > General >

[flhs90]

Thanks Fatboy Sir Garfield:

That thread just about covers it.
We had stopped at a filling station in Florence, Oregon and my friend, fellow rider, noticed it. We just swiveled it sideways until I got home.

This site is a winner. Enjoy your rides.

FLHS 90

aka. Dave

[JohnS_Rosamond]

That special socket doesn't get used much, but when you need it, it's really a life saver.

[flhs90]

Sir Garfield and John S.

Your jpg. pics and tips have slved another minor irritation.
I took my Craftsman 9/16 deep socket to my neighbors' (friend Ron) grinder. Viola, problem solved.
This truly is a great site for a "do it yourselfer."

Cheerrio.

FLH 90