Inner primary bearing size question

[drs23]

I've got a fellow with a cobbles together '80 LowRider that came in with starter issues. It either wouldn't engage the starter drive gear or if it did, it wouldn't release. Had EngineTech inner and LifeLine outer (what POSs ) I found what I *thought* was a stock matching set but the inner doesn't have a casting number at all. The ET inner has a 2" diameter bearing. The inner I found had a 2.5" diameter bearing that I pressed out. Any of you Shovel knowledgeable folks have a clue what I have? The number on the bearing I pressed out is NDH 1205-T-USA if that helps.

Thanks for any feedback. Would sure like to get this thing outta here!

Dale

[bob_e95482]

Yesterday I bought a double sealed bearing, 2" OD by 1" ID by 9/16" wide, part #23216-88 from Motion Industries. The one that came out of my inner primary was 1/2" wide. This is for my '73.