May 01, 2024, 04:24:31 PM

News:

For advertising inquiries or help with registration or other issues, you may contact us by email at help@harleytechtalk.com

mt6 files to mt7?

Started by kevmac, February 13, 2009, 05:47:11 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

kevmac

February 13, 2009, 05:47:11 AM
anyone know how to convert mt6 to mt7?
07 RK 103 bob wright heads, wt4d, and so on.
05 custom chop 113ci 10
98 fatbo

sportygordy

February 13, 2009, 07:12:12 AM #1
It is a manual process, open any mt7 file and copy the cells from the mt6 over to  your opened mt7 file. You can do a cut paste or print out the mt6 and key in the cells. The latter is much safer as i believe the mt7 files have additional cells (column/rows) and if your are not careful with cut and paste, you'll have some incorrect data filling the cells.

kevmac

February 13, 2009, 07:57:51 AM #2
thanx, I just installed tts softwhare and there were no mt7 files to start from? Shouldnt there be some starter files?
07 RK 103 bob wright heads, wt4d, and so on.
05 custom chop 113ci 10
98 fatbo

Hogflash

February 13, 2009, 08:36:05 AM #3
You need to run the TTS updater to get the MT7 files (and the latest software versions).

sportygordy

February 15, 2009, 06:20:41 PM #4
Quote from: Rufus on February 13, 2009, 08:36:05 AM
You need to run the TTS updater to get the MT7 files (and the latest software versions).

Yes Sir - that is correct. Once you run the updater you will see about 20 or so MT7 files.   :up:
User actions
Print
Go Up Pages1