Cam and Tensioner upgrade - 2006 Heritage Softail Classic

[noregrets]

Anyone install this combination in their Twin?

Screamin' Eagle® Hydraulic Cam Chain Tensioner and High-Flow Oil Pump Upgrade Kit p/n 25284-11


Andrews TW21 cams


Fuel Moto Quick Install Pushrods

[machinist]

Many have, good set-up for a stock 88" motor. However, the original set-up isn't bad. You can't leave the lifters in there too long either, I'd just RNR the stock tensioners, etc.

[smoserx1]

If I were changing cams I would go with the 21N conversion cams and the 07 and up cam plate.  No pressing bearings in the plate required and a better setup IMO.  I have 21N's in my FLHT

[irishrover]

just did mine used my 204 cams and up graded to Torrington bearings it was easy to do.