my 9.9 time slip

[bladerunner]

[attach=0]      Well the stars were in alignment yesterday , and the conditions were good . Ran a set of 10.01 etc  . made some changes in my shift points and bam  there it is .    For those not familiar , 2002 dyna  124 S&S  heads by Kirby  .I assembled engine   . I have been chasing a 9 second run for a while now .  I still have to use the bar    , but I`m look`n at a new  clutch set up  should calm down the launches  . This bike is inspected  and street driven  (without the bar  of course ) Thanks  PW Morris for your help
                       bladerunner

[attachment removed after 60 days by system]

[02roadcling]

 

[bladerunner]

[attach=0]

[attachment removed after 60 days by system]

[bladerunner]

[attach=0]

[attachment removed after 60 days by system]

[Merc63]

Awesome, congratulations, hard work paying off.   

B2 heads?  What numbers are you putting down?  Gearing?

[Admiral Akbar]

 

Max

[cvobreakout]

Way to go!

[FXDBI]

    Awesome that bike looks just MEAN  I am jealous!   Bob

[hd king]

CONGRATS!!!! 

[bladerunner]

Awesome, congratulations, hard work paying off.   

B2 heads?  What numbers are you putting down?  Gearing?

149  hp /150 tq    the heads are  S&S superstock 89 cc decked to 82 cc . I used the on my 106 build in stock form , When I went to 124 I sent them to Kirby for clean up / porting . The final drive is 3.55 
    Bladerunner

[DBC]

Great job, keep having fun

[speed limit]

 

[Merc63]

So youre in 5th gear at what rpm do u cross the line at?  Im trying to figure out my gearing.

[FSG]

maybe it's my eyes but that slip is hard to see   

[strokerjlk]

congrats nice job
lots of guys winning with kirbys heads   

[rigidthumper]

Really good 60' time! Having spent countless thousands of $ enjoying that same hobby, may I say- WELL DONE, SIR!

[John/1]

Hi
Excellent well done
What tire do you and size
Thanks john

[bladerunner]

Hi
Excellent well done
What tire do you and size
Thanks john

John I use a SHINKO HOOK UP DRAG radial  180 /17 at 11 psi 

[John/1]

Hi
Excellent well done
What tire do you and size
Thanks john

John I use a SHINKO HOOK UP DRAG radial  180 /17 at 11 psi

Hi
Yes excellent tire I use it as well hook up it does

[pwmorris]

Hell yeah!!!
What's most impressive is the methodical determination to keep at it-thru the good, bad, and ugly.
From 11's to 10's to low tens you kept at it when most would have signed off long ago-
Maybe more will understand that HP is just one of many issues to overcome...

Well done...

Now dial in the new clutch, take off the bar and nail that 9 again!!! 

[FXDRYDR]

Congrats!  That's a helluva strong run!

[Durwood]

I want one.... Great Job, keep up the good work

[bladerunner]

I want one.... Great Job, keep up the good work

NO problem   I`ll sell it    I have enough parts left over from the original stock Dyna I can start the next bike   

[NCTURBOS]

Awesome!!  Nice bike & some nice riding to get it there... 


K.

[1FSTRK]

 
Solid run
Nice looking ride as well

[John/1]

Hi
Do you run a super D and if so any mod's to the carb
Thanks john

[bladerunner]

Hi
Do you run a super D and if so any mod's to the carb
Thanks john

Yes D carb 3 T -Jets  ( bought it that way ) probably get away with 2   
                                      ...........   bladerunner

[prodrag1320]

nice job!

[moose]

super job but now you have to chase the 8's  its a sickness there is no cure for

must shock a lot of crotch rockets on the street

[bladerunner]

super job but now you have to chase the 8's  its a sickness there is no cure for

must shock a lot of crotch rockets on the street

   don`t think my pockets are deep enough for the 8`s.....but I think I can swing ,  a little deeper in the 9`s

[cvobreakout]

Go for it!

[WideWildGlide]

where did you get the front forks? and how dose inverted fork work/feel  with street duty?

[bladerunner]

where did you get the front forks? and how dose inverted fork work/feel  with street duty?

The entire front end  is from a 2012 Hayabusa ,  It  is  14 lbs lighter than my stock dyna narrow glide front end  I had a custom set of trees made to adapt .Also  traxion dynamics set me up with a slightly stiffer spring and Works performance of California  put together a custom set of rear shocks to go with my extended swing arm .  The ride is excellent and completely tunable..............bladerunner

[Hillside Motorcycle]

super job but now you have to chase the 8's  its a sickness there is no cure for

must shock a lot of crotch rockets on the street

BIG leap to put one into the 8's.
Congrats on that sub-10 pull.
Your hooked now........look out wallet....
Scott

[Durwood]

super job but now you have to chase the 8's  its a sickness there is no cure for

must shock a lot of crotch rockets on the street

BIG leap to put one into the 8's.
Congrats on that sub-10 pull.
Your hooked now........look out wallet....
Scott

I told Stroker when he started racing, to stock up on shoes, as the racing program grows the money gets short...Your feet will thank you...

[cvobreakout]

The launch.

[attachment removed after 60 days by system]