May 08, 2024, 11:56:31 PM

News:

For advertising inquiries or help with registration or other issues, you may contact us by email at help@harleytechtalk.com

1200S Cams

Started by gasshawg, January 24, 2014, 08:50:10 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

gasshawg

January 24, 2014, 08:50:10 PM
Have a 2000 1200S and see in service manual that is the only year they used the W cams all other years they used D cams, what is the difference in these cams.
Also need to find a 6 cut ignition cup,what to put a S ignition system on my 81 Ironhead.

aswracing

January 25, 2014, 08:58:22 AM #1 Last Edit: January 25, 2014, 10:08:02 PM by aswracing
D cams (91-06 XL883, 91-03 XL1200):

  • intake 02/41 (223 degrees), .458 lift, .094TDC
  • exhaust 41/02 (223 degrees), .458 lift, .094TDC
W cams (98-03 XL1200S, 04-up XL1200, 07-up XL883):

  • intake 10/25 (215 degrees), .480 lift, .133 TDC
  • exhaust 38/12 (230 degrees), .481 lift, .138 TDC

gasshawg

January 25, 2014, 11:42:58 AM #2
 :up: Thanks for the info on the cams,me I like the profiles,this bike runs on C-16 VP
gas,with Blendzall Goldlabel,S&S E Carb,my manifold mods,HD 2 into 1 no muffler just
my extension,stock ignition,27 tooth trans pulley,16 in back tire,will get bars and struts this year. Thanks Again
User actions
Print
Go Up Pages1