Tighten those trans sprocket retainer bolts!...

[fuzznut5197]

...  Cause this is what happens when you don't. 


My inner primary is now trashed. Here's what the inner primary looked like yesterday:






And here's what it looks like now:




And it appears the bolts snapped at some point, leaving some bolt still in the holes:

[CraigArizona85248]

Ouch!  I always use blue loctite on those little buggers.  I also cut them so that they are just long enough be flush with the inside of the sprocket when they are tightened down on the retaining plate.  This way if they do back-out, they should be about ready to fall out before they come in contact with the inner primary.

-Craig

[Riverside Joe]

Pictures are worth a thousand words, sorry bout the primary n thanks for posting------RJ