crane HI-4TC tuning

doc a1 · March 08, 2009, 08:11:42 PM

Those of you that have tuned with the Crane HI-4TC on a carbed motor, I need some input. I have an AMS built 96", ported and flowed heads, 9.8-1 C/R, Tw 37 G cams, cv40 with Nokk needle,50 pilot jet , 200 main and kerker slip ons on a 99 EG. What settings have worked best for you and what are the settings best to start with. Will get dyno after full break in and be able to put it all together at that time. All input is appreciated.

george248 · March 09, 2009, 10:57:21 AM

bump... same build going together here, only 95"...have not purchase an adjustable ignition yet...

doc a1 · March 11, 2009, 01:21:39 PM

Anyone want to chime in here

Could use some advice.... Thanks...

Jeffd · March 11, 2009, 06:22:54 PM

post it on the twin cam section. This section gets overlooked by a lot of people.

HarleyTechTalk

News:

crane HI-4TC tuning

doc a1

March 08, 2009, 08:11:42 PM

george248

March 09, 2009, 10:57:21 AM #1

doc a1

March 11, 2009, 01:21:39 PM #2

Jeffd

March 11, 2009, 06:22:54 PM #3