high oil pressure

[c.moo]

This is a new motor.Cold start up is about 55-60 pds. pressure. Hot is about 30-35 pds. Check pressure relieve valve, working,not stuck.No oil lines pinch and routed right.Look inside oil tank when running.Oil returning just fine.Have right oil filter. Tryed two different oil pressure guages.They both read the same.Oil tank and oil lines are new and have been flush and clean before putting on.The reason i'm asking is old motor had about 30-35 pds of pressure when cold,hot was about 10-15 pds. I don't know if high oil pressure on this new motor is good or bad? Don't won't to ruin new motor.