Wrist pin clip tool

OFBagger · March 11, 2009, 12:05:43 PM

There are 20 of these on dutch auction on ebay

KENT MOORE EN-46745 PISTION PIN RETAINER REMOVE/INSTAL Item number: 380109464611

http://cgi.ebay.com/ebaymotors/KENT-MOORE-EN-46745-PISTION-PIN-RETAINER-REMOVE-INSTAL_W0QQcmdZViewItemQQ_trksidZp1742Q2em153Q2el1262QQcategoryZ63700QQihZ025QQitemZ380109464611

Scurvy · March 11, 2009, 02:44:00 PM

k you guys, you can quit bidding on those now... (as long as the colonel gets one, hehe)

OFBagger · March 11, 2009, 02:56:42 PM

I'm guessing I'll be the low bidder
So best I can tell they will to for $9
Looks like that's what they went for his last auction

superglidesport1 · March 11, 2009, 06:05:40 PM

Quote from: OFBagger on March 11, 2009, 12:05:43 PM
There are 20 of these on dutch auction on ebay

KENT MOORE EN-46745 PISTION PIN RETAINER REMOVE/INSTAL Item number: 380109464611

http://cgi.ebay.com/ebaymotors/KENT-MOORE-EN-46745-PISTION-PIN-RETAINER-REMOVE-INSTAL_W0QQcmdZViewItemQQ_trksidZp1742Q2em153Q2el1262QQcategoryZ63700QQihZ025QQitemZ380109464611

Are these compatible with HD TC engines / wrist pin clips? Looks like the HD OE Tool but is the tool pin clip diameter correct?"

Thanks,

Mike52 · March 11, 2009, 08:34:16 PM

Quote from: Superglidesport1 on March 11, 2009, 06:05:40 PM
Quote from: OFBagger on March 11, 2009, 12:05:43 PM
There are 20 of these on dutch auction on ebay

KENT MOORE EN-46745 PISTION PIN RETAINER REMOVE/INSTAL Item number: 380109464611

http://cgi.ebay.com/ebaymotors/KENT-MOORE-EN-46745-PISTION-PIN-RETAINER-REMOVE-INSTAL_W0QQcmdZViewItemQQ_trksidZp1742Q2em153Q2el1262QQcategoryZ63700QQihZ025QQitemZ380109464611

Are these compatible with HD TC engines / wrist pin clips? Looks like the HD OE Tool but is the tool pin clip diameter correct?"

Thanks,

The tip on that tool looks a lot smaller than the tip on my HD tool, but it's hard to tell simply by looking at the pic they show.

Tre_11 FLHX · March 12, 2009, 01:36:43 AM

Mike52-It comes with a couple of tips. I bought one off the last auction, have yet to use it.

Mike

timetraveler · March 16, 2009, 11:19:22 AM

Cool, that was easy, and a good price too.

Scurvy · March 16, 2009, 12:06:35 PM

That did work out well, didn't it.

Sc00ter · March 16, 2009, 12:51:25 PM

Yep! Got one myself!!

Big Dan · March 16, 2009, 12:56:22 PM

I got in on that as well. I figure for 9 bucks, what the heck.

14Frisco · March 16, 2009, 01:13:08 PM

Several years ago, for my EVO, I got the "Slinger Airflow" tool sold/distributed by Biker's Choice. It can e.g. be seen here:
http://www.santamariaharley.com/eshopprod_cat_3945-9053-38209_product_488546.BIKERS_CHOICE174_WRIST_PIN.htm

I just measured the tip of it - it's ~0.45" in diameter. What's the diameter of the tip of the tools you guys are getting?

Jeffd · March 16, 2009, 01:15:00 PM

Quote from: 14Frisco link=topic=7477.msg78532#msg78532I just measured the tip of it - it's ~0.45" in diameter. What's the diameter of the tip of the tools you guys are getting?

Mine is a bit bigger than .45" in diameter, not bragging just saying LOL.

14Frisco · March 16, 2009, 01:25:13 PM

Well, mine is for an Evo, the Twin Cam tool is different I think. I am just curious for future reference. $9 sounds like a good deal.

Mine is black (like yours) so it should be fast...

tireater · March 16, 2009, 01:29:03 PM

The shipping is more than the tool...

Sc00ter · March 16, 2009, 01:48:01 PM

Quote from: 14Frisco on March 16, 2009, 01:25:13 PM
Well, mine is for an Evo, the Twin Cam tool is different I think. I am just curious for future reference. $9 sounds like a good deal.

Mine is black (like yours) so it should be fast...

Can't argue with that!

road-dawgs1 · March 16, 2009, 02:08:09 PM

Quote from: tireater on March 16, 2009, 01:29:03 PM
The shipping is more than the tool...

I know, I bought one for $8.95 and have to pay $13.05 for shipping.

bladerunner · March 18, 2009, 03:15:18 PM

I got mine today , comes with two tips ...either one seems to work ..very neat for under $20 bucks......bladerunner

Scurvy · March 18, 2009, 03:38:56 PM

yay, new tool for the tool box!

Sonny S. · March 23, 2009, 12:36:40 PM

yeah I had to get one too .....

Just tried it, and the large tip works for TC's , and I tried the small tip on an EVO piston, and it works for that....purdy cool !!

Thanks for the heads up OFBagger

apes · March 23, 2009, 01:32:42 PM

I once bought a new axle wrench off eBay for something like $5 and the shipping was $10, I asked the seller why it was so expensive to ship afterall it was just a strip of steel and to just put it in an envelope and put a stamp on it. He replied that the wrench in itself would be simple enough but it was the large blister pack that the wrench was wrapped in that made the package too large for an envelope. I asked him to remove it from the blister pack which he did and the shipping was much less.......

Sonny S. · March 23, 2009, 03:35:10 PM

this tool is typically about $100......... even with shipping we done gooood

Sc00ter · March 23, 2009, 03:38:44 PM

Quote from: Sonny S. on March 23, 2009, 03:35:10 PM
this tool is typically about $100......... even with shipping we done gooood

Yep...thanks for the heads up on this steal of a purchase!

nc-renegade · March 23, 2009, 06:54:03 PM

I have one. Works real well and you cannot beat the price. It works well on pistons up to 103", but will need modification on real large pistons...131" or 135", perhaps on 124" as well.

News:

Wrist pin clip tool

March 11, 2009, 02:44:00 PM #1

March 11, 2009, 02:56:42 PM #2

March 11, 2009, 06:05:40 PM #3

March 11, 2009, 08:34:16 PM #4

March 12, 2009, 01:36:43 AM #5

March 16, 2009, 11:19:22 AM #6

March 16, 2009, 12:06:35 PM #7

March 16, 2009, 12:51:25 PM #8

March 16, 2009, 12:56:22 PM #9

March 16, 2009, 01:13:08 PM #10

March 16, 2009, 01:15:00 PM #11 Last Edit: March 16, 2009, 02:23:30 PM by Fatboy_SirGarfield

March 16, 2009, 01:25:13 PM #12

March 16, 2009, 01:29:03 PM #13

March 16, 2009, 01:48:01 PM #14

March 16, 2009, 02:08:09 PM #15

March 18, 2009, 03:15:18 PM #16

March 18, 2009, 03:38:56 PM #17

March 23, 2009, 12:36:40 PM #18 Last Edit: March 23, 2009, 01:00:38 PM by Sonny S.

March 23, 2009, 01:32:42 PM #19

March 23, 2009, 03:35:10 PM #20

March 23, 2009, 03:38:44 PM #21

March 23, 2009, 06:54:03 PM #22