how to post a drawing for wiring help where you guys can draw on it??

[1982fxr]

I need to re-wire my 82 FXR that I put a 1998 Evo in.  Very basic wiring and I'm going from scratch.  All original wiring on this bike is looong gone.  I know there are simple diagrams out there but none that I've seen have the same components as what I have; more wires or less wires coming from components.

Is there a way I can draw out what I have, post the pic and then you guys can also draw on the same "blueprint" and that will become my wiring diagram?

[Racepres]

Yes...just like a Picture. Or
I have this

And the simple version
Harley Handlebar Control Wiring

Right Side;
Brake Light; *Orange =Hot,  *Red to Brake Light
Turn Signal; *Green= Hot from Flasher,   *Brown  to Right Turn Sig.s
Run/Off; *Grey=Hot from Switch,  *White  to Coil & to Start Button
Start;  *White=Hot from Run/Off Switch,   * Black to Solenoid

Left Side;
High/Low; * Blue= Hot [Lights On from Switch], *Yellow= Low Beam, * White=High Beam
Turn; *Green= Hot from Flasher, *Purple to Left Turn Sig.s
Horn; *Orange=Hot, *Black to Horn

[Devo]

http://www.dynaonline.com/skins/downloads/instruct/D2Ki.pdf