Baker comp almost ready for shipping.

[rageglide]

What is the definition of "Failed"?

You hit the gas and it don't move..

I'll drink to that.  How many of these crappy compensators do that...

[Admiral Akbar]

What is the definition of "Failed"?

You hit the gas and it don't move..

I'll drink to that.  How many of these crappy compensators do that...

All I can say is the new one sucks...

[rageglide]

What is the definition of "Failed"?

You hit the gas and it don't move..

I'll drink to that.  How many of these crappy compensators do that...

All I can say is the new one sucks...

It's a little early, but I'll drink to that too...

Sounds like lots of Fraud happens.

[rbabos]

What is the definition of "Failed"?

You hit the gas and it don't move..

I'll drink to that.  How many of these crappy compensators do that...

All I can say is the new one sucks...

Did you update to the latest version recently?
Ron

[sprinkman]

Thanks guys, you might be right Max. Just did not want to go a month over and it go out. Might open it up next week and take another look at it has been almost 20000 since I looked last.

[Admiral Akbar]

What is the definition of "Failed"?

You hit the gas and it don't move..

I'll drink to that.  How many of these crappy compensators do that...

All I can say is the new one sucks...

Did you update to the latest version recently?
Ron

Coupla days ago.

[Sc00ter]

What is the definition of "Failed"?

You hit the gas and it don't move..

I'll drink to that.  How many of these crappy compensators do that...

All I can say is the new one sucks...

Why?

[Rokinrider]

Having a low mile 2013 Slim I have so much to look forward to. I got to talk to Mr Baker at Rapids City last summer, good guy, fun to talk to. I'll be in line some day. 

[Reddog74usa]

Yeah, I have a 2008 Fat bob I just bought with only 4 K on it but after reading all this crapola about these later models I don't think I'll even put tags on it and just sell it. I don't need all this drama and just want to ride. I think I'll look for a nice FXR, you boys can have fun fixing the latest n not so greatest. To me, all the issues  these newer models are having are outrages. Don't get me wrong, I like a lot of things about the newer bikes but if I don't have piece of mind in my ride it ruins the entire experience.

[Admiral Akbar]

What is the definition of "Failed"?

You hit the gas and it don't move..

I'll drink to that.  How many of these crappy compensators do that...

All I can say is the new one sucks...

Why?

Has an idle rattle that seams about 10 times worse than the early SE that I removed.
Add:
Heck you blip the throttle it rattles..

[rageglide]

Max, did you get the PEEK washer?

[hrdtail78]

I'm going beltdrive. 

[Teardrop]

Does anyone know if testing is complete and if they are ready to ship?

[Just Nick]

Testing is not complete not ready to ship yet

[Soft 02]

I think April is the target date plus most of the test comps are still out for beta testing.

[Admiral Akbar]

Max, did you get the PEEK washer?

Not yet.. Looking into it..

[FlaHeatWave]

I think April is the target date plus most of the test comps are still out for beta testing.

All the test comps have been out for awhile, May.

[Soft 02]

I think April is the target date plus most of the test comps are still out for beta testing.

All the test comps have been out for awhile, May.

Good to know. Herd it was April.

[gabbyduffy]

 

Max, did you get the PEEK washer?

Not yet.. Looking into it..  Do you have any crank work done to the motor? what year bike? .........Maybe its the rough idle making it Rattle....... 

[gabbyduffy]

         In my opinion cam profile has a lot to do with the comps. rattling at idle or not.

[Admiral Akbar]

Max, did you get the PEEK washer?

Not yet.. Looking into it..  Do you have any crank work done to the motor? what year bike? .........Maybe its the rough idle making it Rattle....... 

I'm sure the idle is making it rattle.. No work to the crank.. Crank has 67K on it.. Measures 0.004 runout on the drive side..  Last time I checked the pinion it was 0.0035..

[Teardrop]

Thanks for the update. Looking forward to reading what the test results are. My SE comp has about 7k on it and its already making noise.

[Soft 02]

Well its 87* outside and I think im gunna go beat up on my comp for a few.

[rageglide]

I'd like to see those coming out with replacement Comps do something with the reversible  Sprocket Shaft Spacer 24009-06, by that I mean make a non-reversible one that provides more contact with the inside of the rotor.

Jumping into the way back machine...

I was looking at this.  How can you get the spacer wrong?  The splines are cut so you can't make a mistake.  Well... unless you put the cam on the spacer first.  But, even then, isn't it obvious?

[attach=1]

Here's a picture of 14+ and the previous SE style that was on my '12.

[rageglide]

Well its 87* outside and I think im gunna go beat up on my comp for a few.

95* here today... wth.  I should be riding, not wrenching.